Board specific definitions for the ATxmegaA1U Xplained Pro board. More...
Detailed Description
Board specific definitions for the ATxmegaA1U Xplained Pro board.
Definition in file board.h.
Include dependency graph for board.h: This graph shows which files directly or indirectly include this file:Go to the source code of this file.
| #define | CLOCK_CORECLOCK MHZ(32) |
| Clock configuration. | |
Baudrate for STDIO terminal | |
The standard configuration for STDIO in cpu/atxmega/periph/uart.c is to use double speed. For 32MHz F_CPU following Baudrate have good error rates 115200 Matches this with BAUD in Board/Makefile.include | |
| #define | STDIO_UART_BAUDRATE (115200U) |
LED pin definitions and handlers | |
| #define | LED_PORT PORTQ |
| #define | LED0_PIN GPIO_PIN(PORT_Q, 3) |
| #define | LED0_MODE GPIO_OUT |
| #define | LED0_MASK (PIN3_bm) |
| #define | LED0_ON (LED_PORT.OUTCLR = LED0_MASK) |
| #define | LED0_OFF (LED_PORT.OUTSET = LED0_MASK) |
| #define | LED0_TOGGLE (LED_PORT.OUTTGL = LED0_MASK) |
| #define | LED_PORT_MASK (LED0_MASK) |
Button pin configuration | |
| #define | BTN0_PIN GPIO_PIN(PORT_Q, 2) |
| #define | BTN0_MODE (GPIO_IN | GPIO_OPC_PU | GPIO_SLEW_RATE) |
| #define | BTN0_INT_FLANK (GPIO_ISC_FALLING | GPIO_LVL_LOW) |
xtimer configuration values | |
if XTIMER_HZ > 1MHz then (XTIMER_HZ != (1000000ul << XTIMER_SHIFT)) if XTIMER_HZ < 1MHz then ((XTIMER_HZ << XTIMER_SHIFT) != 1000000ul) 32MHz Core Clock XTIMER_HZ 4000000 (clkdiv 8 ) XTIMER_SHIFT 2 XTIMER_HZ 1000000 () XTIMER_SHIFT 0 XTIMER_HZ 500000 (clkdiv 64) XTIMER_SHIFT 1 XTIMER_HZ 250000 (clkdiv 128) XTIMER_SHIFT 2 XTIMER_HZ 31250 (clkdiv 1024) XTIMER_SHIFT 5 | |
| #define | XTIMER_DEV TIMER_DEV(0) |
| #define | XTIMER_CHAN (0) |
| #define | XTIMER_WIDTH (16) |
| #define | XTIMER_HZ KHZ(500) |
| #define | XTIMER_BACKOFF (150) |
Macro Definition Documentation
◆ BTN0_INT_FLANK
| #define BTN0_INT_FLANK (GPIO_ISC_FALLING | GPIO_LVL_LOW) |
◆ BTN0_MODE
| #define BTN0_MODE (GPIO_IN | GPIO_OPC_PU | GPIO_SLEW_RATE) |
