periph_conf.h File Reference

Peripheral configuration for the E104-BT50xxA Test Board. More...

Detailed Description

Peripheral configuration for the E104-BT50xxA Test Board.

Author

Benjamin Valentin benpi.nosp@m.cco@.nosp@m.googl.nosp@m.emai.nosp@m.l.com

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "cfg_rtt_default.h"
#include "cfg_timer_default.h"

Include dependency graph for periph_conf.h:

Go to the source code of this file.

Clock configuration
The E104-BT50xxA module does not have any external oscillators
#define	CLOCK_HFCLK   (1) /* external crystal */
#define	CLOCK_LFCLK   (CLOCK_LFCLKSRC_SRC_RC)
	LFCLK Source.

SPI configuration
#define	SPI_NUMOF   ARRAY_SIZE(spi_config)
static const spi_conf_t	spi_config []

I2C configuration
#define	I2C_NUMOF   ARRAY_SIZE(i2c_config)
static const i2c_conf_t	i2c_config []

UART configuration
#define	UART_0_ISR   (isr_uart0)
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

Macro Definition Documentation

CLOCK_HFCLK

#define CLOCK_HFCLK   (1) /* external crystal */

Definition at line 36 of file periph_conf.h.

CLOCK_LFCLK

#define CLOCK_LFCLK   (CLOCK_LFCLKSRC_SRC_RC)

LFCLK Source.

Definition at line 42 of file periph_conf.h.

I2C_NUMOF

#define I2C_NUMOF   ARRAY_SIZE(i2c_config)

Definition at line 72 of file periph_conf.h.

SPI_NUMOF

#define SPI_NUMOF   ARRAY_SIZE(spi_config)

Definition at line 57 of file periph_conf.h.

UART_0_ISR

#define UART_0_ISR   (isr_uart0)

Definition at line 92 of file periph_conf.h.

UART_NUMOF

#define UART_NUMOF   ARRAY_SIZE(uart_config)

Definition at line 94 of file periph_conf.h.

Variable Documentation

i2c_config

const i2c_conf_t i2c_config[]

static

Initial value:

= {
    {
        .dev = NRF_TWIM0,
        .scl = GPIO_PIN(0, 6),
        .sda = GPIO_PIN(0, 7),
        .speed = I2C_SPEED_NORMAL
    }
}

Definition at line 64 of file periph_conf.h.

spi_config

const spi_conf_t spi_config[]

static

Initial value:

= {
    {
        .dev  = NRF_SPIM0,
        .sclk = GPIO_PIN(0, 26),
        .mosi = GPIO_PIN(0, 27),
        .miso = GPIO_PIN(0, 28),
    },
}

Definition at line 49 of file periph_conf.h.

uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
    { 
        .dev        = NRF_UARTE0,
        .rx_pin     = GPIO_PIN(0, 14),
        .tx_pin     = GPIO_PIN(0, 18),
 
 
 
 
        .irqn       = UARTE0_UART0_IRQn,
    },
}

Definition at line 79 of file periph_conf.h.