Support for the BASTWAN SAM R34 board. More...

Detailed Description

Support for the BASTWAN SAM R34 board.

Files
file	board.h
	Support for the BASTWAN SAM R34 board.

file	gpio_params.h
	Board specific configuration of direct mapped GPIOs.

file	periph_conf.h
	Peripheral MCU configuration for the bastwan board.

Semtech SX1276 configuration
#define	SX127X_PARAM_SPI (SPI_DEV(1))

#define	SX127X_PARAM_SPI_NSS GPIO_PIN(PB, 31) /* D10 */

#define	SX127X_PARAM_RESET GPIO_PIN(PB, 15) /* A0 */

#define	SX127X_PARAM_DIO0 GPIO_PIN(PB, 16) /* D2 */

#define	SX127X_PARAM_DIO1 GPIO_PIN(PA, 11) /* D3 */

#define	SX127X_PARAM_DIO2 GPIO_PIN(PA, 12) /* D4 */

#define	SX127X_PARAM_DIO3 GPIO_PIN(PB, 17) /* D5 */

#define	SX127X_PARAM_PASELECT (SX127X_PA_RFO)

Board specific configuration
#define	TCXO_PWR_PIN GPIO_PIN(PB, 3)

#define	TX_OUTPUT_SEL_PIN GPIO_PIN(PA, 13)

#define	TX_SWITCH_PWR_PIN GPIO_PIN(PA, 28)

LED pin definitions and handlers
#define	LED_PORT PORT->Group[0]

#define	LED0_PIN GPIO_PIN(PA, 22)

#define	LED0_MASK (1 << 22)

#define	LED0_ON (LED_PORT.OUTCLR.reg = LED0_MASK)

#define	LED0_OFF (LED_PORT.OUTSET.reg = LED0_MASK)

#define	LED0_TOGGLE (LED_PORT.OUTTGL.reg = LED0_MASK)

Macro Definition Documentation

◆ LED0_MASK

#define LED0_MASK (1 << 22)

Definition at line 61 of file board.h.

◆ LED0_OFF

#define LED0_OFF (LED_PORT.OUTSET.reg = LED0_MASK)

Definition at line 63 of file board.h.

◆ LED0_ON

#define LED0_ON (LED_PORT.OUTCLR.reg = LED0_MASK)

Definition at line 62 of file board.h.

◆ LED0_PIN

#define LED0_PIN GPIO_PIN(PA, 22)

Definition at line 60 of file board.h.

◆ LED0_TOGGLE

#define LED0_TOGGLE (LED_PORT.OUTTGL.reg = LED0_MASK)

Definition at line 64 of file board.h.

◆ LED_PORT

#define LED_PORT PORT->Group[0]

Definition at line 59 of file board.h.

◆ SX127X_PARAM_DIO0

#define SX127X_PARAM_DIO0 GPIO_PIN(PB, 16) /* D2 */

Definition at line 39 of file board.h.

◆ SX127X_PARAM_DIO1

#define SX127X_PARAM_DIO1 GPIO_PIN(PA, 11) /* D3 */

Definition at line 40 of file board.h.

◆ SX127X_PARAM_DIO2

#define SX127X_PARAM_DIO2 GPIO_PIN(PA, 12) /* D4 */

Definition at line 41 of file board.h.

◆ SX127X_PARAM_DIO3

#define SX127X_PARAM_DIO3 GPIO_PIN(PB, 17) /* D5 */

Definition at line 42 of file board.h.

◆ SX127X_PARAM_PASELECT

#define SX127X_PARAM_PASELECT (SX127X_PA_RFO)

Definition at line 43 of file board.h.

◆ SX127X_PARAM_RESET

#define SX127X_PARAM_RESET GPIO_PIN(PB, 15) /* A0 */

Definition at line 38 of file board.h.

◆ SX127X_PARAM_SPI

#define SX127X_PARAM_SPI (SPI_DEV(1))

Definition at line 36 of file board.h.

◆ SX127X_PARAM_SPI_NSS

#define SX127X_PARAM_SPI_NSS GPIO_PIN(PB, 31) /* D10 */

Definition at line 37 of file board.h.

◆ TCXO_PWR_PIN

#define TCXO_PWR_PIN GPIO_PIN(PB, 3)

Definition at line 50 of file board.h.

◆ TX_OUTPUT_SEL_PIN

#define TX_OUTPUT_SEL_PIN GPIO_PIN(PA, 13)

Definition at line 51 of file board.h.

◆ TX_SWITCH_PWR_PIN

#define TX_SWITCH_PWR_PIN GPIO_PIN(PA, 28)

Definition at line 52 of file board.h.