STM32C0116-DK

Support for the STM32C0116-DK board. More...

Detailed Description

Support for the STM32C0116-DK board.

General information

The ST STM32C0116-DK is an evaluation board supporting a ARM Cortex-M0 STM32C011F6 microcontroller with 8KB of RAM and 32KB of ROM Flash.

Pinout

See this application note as reference. This means the responsibility is on the firmware configurer to take special care when configuring IO, ensuring that ports are not conflicting on each pin.

MCU

MCU	STM32C011F6
Family	ARM Cortex-M0+
Vendor	ST Microelectronics
RAM	8KiB
Flash	32KiB
Frequency	up to 48MHz (set to 48MHz on RIOT)
FPU	no
Timers	8 (2x watchdog, 1 SysTick, 5x 16-bit)
ADCs	1x 12-bit (up to 15 channels)
UARTs	2
SPIs	1
I2Cs	1
RTC	1
Vcc	2.0V - 3.6V
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board

A detailed description about the flashing process can be found on the guides page. The board name for the STM32C0116-DK is stm32c0116-dk and the default programmer is OpenOCD. Please note that the STM32C0 series is only supported by OpenOCD versions newer than 0.12.0.

Files
file	board.h
	Board specific definitions for the STM32C0116-DK.
file	periph_conf.h
	Configuration of CPU peripherals for STM32C0116-DK board.