42#define NRF24L01P_NG_MIN_ADDR_WIDTH (3)
47#define NRF24L01P_NG_MAX_ADDR_WIDTH (5)
53#ifndef NRF24L01P_NG_ADDR_WIDTH
54#define NRF24L01P_NG_ADDR_WIDTH NRF24L01P_NG_MAX_ADDR_WIDTH
55#elif (NRF24L01P_NG_ADDR_WIDTH < NRF24L01P_NG_MIN_ADDR_WIDTH) || \
56 (NRF24L01P_NG_ADDR_WIDTH > NRF24L01P_NG_MAX_ADDR_WIDTH)
57#error "NRF24L01P_NG_ADDR_WIDTH must be within [3, 5]"
65#define NRF24L01P_NG_BROADCAST_ADDR { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }
70#define NRF24L01P_NG_ADDR_P0(dev) ((dev)->arxaddr.rx_addr_long[NRF24L01P_NG_P0])
75#define NRF24L01P_NG_ADDR_P1(dev) ((dev)->arxaddr.rx_addr_long[NRF24L01P_NG_P1])
83#define NRF24L01P_NG_ADDR_PX_LSB(dev, pipe) ((dev)->arxaddr.rx_addr_short[(pipe) - 2])
88typedef struct __attribute__((packed)) {
438#if IS_USED(MODULE_NRF24L01P_NG_DIAGNOSTICS)
457nrf24l01p_ng_diagnostics_string_to_state(
const char *sstate);
Definitions low-level network driver interface.
Low-level GPIO peripheral driver interface definitions.
int nrf24l01p_ng_set_retransm_delay(nrf24l01p_ng_t *dev, nrf24l01p_ng_ard_t rt_delay)
Set retransmission delay for ESB.
int nrf24l01p_ng_set_tx_power(nrf24l01p_ng_t *dev, nrf24l01p_ng_tx_power_t power)
Configure Tx trasceiver power.
uint8_t nrf24l01p_ng_get_max_retransm(const nrf24l01p_ng_t *dev)
Get currently configured number of maximum retransmissions for ESB.
int nrf24l01p_ng_get_enable_pipe(nrf24l01p_ng_t *dev, nrf24l01p_ng_pipe_t pipe, bool *enable)
Query if data pipe pipe is enabled.
int nrf24l01p_ng_set_crc(nrf24l01p_ng_t *dev, nrf24l01p_ng_crc_t crc)
Configure CRC length.
#define NRF24L01P_NG_ADDR_WIDTH
Pass the compiler a definition of NRF24L01P_NG_ADDR_WIDTH to configure the layer-2 address width of t...
uint8_t nrf24l01p_ng_get_crc(const nrf24l01p_ng_t *dev, nrf24l01p_ng_crc_t *crc)
Get currently configured CRC length.
int nrf24l01p_ng_setup(nrf24l01p_ng_t *dev, const nrf24l01p_ng_params_t *params, uint8_t index)
Setup the NRF24L01+ driver, but perform no initialization.
int nrf24l01p_ng_set_channel(nrf24l01p_ng_t *dev, uint8_t channel)
Set transceiver channel.
int nrf24l01p_ng_set_state(nrf24l01p_ng_t *dev, nrf24l01p_ng_state_t state)
Put device into sleep mode(NRF24L01P_NG_STATE_POWER_DOWN), standby mode (NRF24L01P_NG_STATE_STANDBY_1...
uint8_t nrf24l01p_ng_get_channel(const nrf24l01p_ng_t *dev)
Get currently configured transceiver channel.
int nrf24l01p_ng_set_rx_address(nrf24l01p_ng_t *dev, const uint8_t *addr, nrf24l01p_ng_pipe_t pipe)
Set Rx address of a certain data pipe.
nrf24l01p_ng_state_t nrf24l01p_ng_get_state(const nrf24l01p_ng_t *dev)
Get current device state.
void nrf24l01p_ng_eui_get(const netdev_t *dev, uint8_t *eui)
Retrieve a unique layer-2 address for an nrf24l01p_ng instance.
int8_t nrf24l01p_ng_get_tx_power(const nrf24l01p_ng_t *dev, nrf24l01p_ng_tx_power_t *power)
Get currently configured Tx transceiver power.
int nrf24l01p_ng_set_max_retransm(nrf24l01p_ng_t *dev, uint8_t max_rt)
Configure maximum number of retransmissions for ESB.
uint16_t nrf24l01p_ng_get_retransm_delay(const nrf24l01p_ng_t *dev, nrf24l01p_ng_ard_t *rt_delay)
Get retransmission delay for ESB.
int nrf24l01p_ng_set_air_data_rate(nrf24l01p_ng_t *dev, nrf24l01p_ng_rfdr_t data_rate)
Configure air data rate.
int nrf24l01p_ng_set_enable_pipe(nrf24l01p_ng_t *dev, nrf24l01p_ng_pipe_t pipe, bool enable)
Enable or disable data pipe pipe.
uint16_t nrf24l01p_ng_get_air_data_rate(const nrf24l01p_ng_t *dev, nrf24l01p_ng_rfdr_t *data_rate)
Get currently configured data rate.
int nrf24l01p_ng_get_rx_address(const nrf24l01p_ng_t *dev, uint8_t *addr, nrf24l01p_ng_pipe_t pipe)
Get current Rx address of a certain data pipe.
Common macros and compiler attributes/pragmas configuration.
Protocol type definitions.
Definitions of user visible types for the NRF24L01+ (NG) device driver.
enum nrf24l01p_ng_rfdr nrf24l01p_ng_rfdr_t
Possible values to configure the data rate.
enum nrf24l01p_ng_pipe nrf24l01p_ng_pipe_t
Enumeration of NRF24L01+ data pipes.
enum nrf24l01p_ng_ard nrf24l01p_ng_ard_t
Possible values to configure the retransmission delay in ESB.
enum nrf24l01p_ng_state nrf24l01p_ng_state_t
NRF24L01+ operation states.
enum nrf24l01p_ng_crc nrf24l01p_ng_crc_t
Possible values to configure the CRC length.
enum nrf24l01p_ng_tx_power nrf24l01p_ng_tx_power_t
Possible values to configure the radio power.
Low-level SPI peripheral driver interface definition.
Structure to hold driver state.
Struct that holds all active configuration values.
uint8_t cfg_data_rate
Current data rate configuration value.
uint8_t cfg_tx_power
Current tx power configuration value.
uint8_t cfg_crc
Current CRC length configuration value.
uint8_t cfg_retr_delay
Current retransmission delay configuration value.
uint8_t cfg_channel
Current channel.
uint8_t cfg_max_retr
Current maximum number of retransmissions.
Struct of NRF24L01+ initialization parameters.
gpio_t pin_irq
NRF24L01+ IRQ gpio pin.
gpio_t pin_ce
NRF24L01+ chip enable gpio pin.
gpio_t pin_cs
SPI chip select gpio pin.
nrf24l01p_ng_cfg_t config
Current configuration values.
spi_clk_t spi_clk
SPI clock speed.
nrf24l01p_ng_params_t params
Parameters.
uint8_t rx_addr_short[4]
Array to access the addresses of pipe 2, pipe 3, pipe 4 and pipe 5 via pipe indices.
uint8_t state
Current operation state.
struct nrf24l01p_ng::@230 arxaddr
Rx addresses.
uint8_t rx_addr_long[2][NRF24L01P_NG_ADDR_WIDTH]
Array to access the addresses of pipe 0 and pipe 1 via pipe indices.
uint8_t idle_state
State to return to after sending.
netdev_t netdev
Netdev member.