board.h

Go to the documentation of this file.

/*
 * Copyright (C) 2023 Mesotic SAS
 *
 * This file is subject to the terms and conditions of the GNU Lesser
 * General Public License v2.1. See the file LICENSE in the top level
 * directory for more details.
 */
 
#ifndef BOARD_H
#define BOARD_H
 
#include "cpu.h"
 
#ifdef __cplusplus
extern "C" {
#endif
 
#define CLOCK_CORECLOCK     MHZ(128)
 
 /* CLOCK_HFCLKSRC_SRC_HFXO to use external 32MHz crystal
  *   CLOCK_HFCLKSRC_SRC_HFINT to use internal crystal */
#define CLOCK_HFCLK         (CLOCK_HFCLKSRC_SRC_HFXO) 
/* LFCLK Source clock selection:*/
/* - CLOCK_LFCLKSRC_SRC_LFRC: 32.768 kHz RC oscillator
 * - CLOCK_LFCLKSRC_SRC_LFXO: 32.768 kHz crystal oscillator
 * - CLOCK_LFCLKSRC_SRC_LFSYNT: 32.768 kHz synthesized from HFCLK*/
#define CLOCK_LFCLK         (CLOCK_LFCLKSRC_SRC_LFXO) 
#define LED0_PIN            GPIO_PIN(0, 28) 
#define LED1_PIN            GPIO_PIN(0, 29) 
#define LED2_PIN            GPIO_PIN(0, 30) 
#define LED3_PIN            GPIO_PIN(0, 31) 
#define LED0_MASK           (1 << 28)       
#define LED1_MASK           (1 << 29)       
#define LED2_MASK           (1 << 30)       
#define LED3_MASK           (1 << 31)       
#define LED_PORT            (NRF_P0_S) 
#define LED0_ON             (LED_PORT->OUTCLR = LED0_MASK) 
#define LED0_OFF            (LED_PORT->OUTSET = LED0_MASK) 
#define LED0_TOGGLE         (LED_PORT->OUT   ^= LED0_MASK) 
#define LED1_ON             (LED_PORT->OUTCLR = LED1_MASK) 
#define LED1_OFF            (LED_PORT->OUTSET = LED1_MASK) 
#define LED1_TOGGLE         (LED_PORT->OUT   ^= LED1_MASK) 
#define LED2_ON             (LED_PORT->OUTCLR = LED2_MASK) 
#define LED2_OFF            (LED_PORT->OUTSET = LED2_MASK) 
#define LED2_TOGGLE         (LED_PORT->OUT   ^= LED2_MASK) 
#define LED3_ON             (LED_PORT->OUTCLR = LED3_MASK) 
#define LED3_OFF            (LED_PORT->OUTSET = LED3_MASK) 
#define LED3_TOGGLE         (LED_PORT->OUT   ^= LED3_MASK) 
#define BTN0_PIN            GPIO_PIN(0, 23)  
#define BTN0_MODE           GPIO_IN_PU       
#define BTN1_PIN            GPIO_PIN(0, 24)  
#define BTN1_MODE           GPIO_IN_PU       
#define BTN2_PIN            GPIO_PIN(0, 8)   
#define BTN2_MODE           GPIO_IN_PU       
#define BTN3_PIN            GPIO_PIN(0, 9)   
#define BTN3_MODE           GPIO_IN_PU       
#define MTD_0       mtd_dev_get(0)
 
#define BOARD_QSPI_PIN_CS       GPIO_PIN(0, 18)     
#define BOARD_QSPI_PIN_WP       GPIO_PIN(0, 15)     
#define BOARD_QSPI_PIN_HOLD     GPIO_PIN(0, 16)     
#ifdef __cplusplus
}
#endif
 
#endif /* BOARD_H */