Board specific definitions for the SODAQ SARA SFF board.
More...
Board specific definitions for the SODAQ SARA SFF board.
- Author
- Kees Bakker kees@.nosp@m.soda.nosp@m.q.com
Definition in file board.h.
#include "cpu.h"
#include "board_common.h"
#include "periph/gpio.h"
Go to the source code of this file.
◆ BTN0_MODE
◆ BTN0_PIN
◆ GPS_ENABLE_MASK
| #define GPS_ENABLE_MASK (1 << 18) |
◆ GPS_ENABLE_OFF
| #define GPS_ENABLE_OFF (GPS_ENABLE_PORT.OUTCLR.reg = GPS_ENABLE_MASK) |
◆ GPS_ENABLE_ON
| #define GPS_ENABLE_ON (GPS_ENABLE_PORT.OUTSET.reg = GPS_ENABLE_MASK) |
◆ GPS_ENABLE_PIN
◆ GPS_ENABLE_PORT
| #define GPS_ENABLE_PORT PORT->Group[PA] |
◆ GPS_TIMEPULSE_MODE
◆ GPS_TIMEPULSE_PIN
◆ INT1_XL_MODE
◆ INT1_XL_PIN
◆ INT2_XL_MODE
◆ INT2_XL_PIN
◆ INT_MAG_MODE
◆ INT_MAG_PIN
◆ LED0_MASK
| #define LED0_MASK (1 << 16) |
◆ LED0_OFF
| #define LED0_OFF (LED0_PORT.OUTSET.reg = LED0_MASK) |
◆ LED0_ON
| #define LED0_ON (LED0_PORT.OUTCLR.reg = LED0_MASK) |
◆ LED0_PIN
◆ LED0_PORT
| #define LED0_PORT PORT->Group[PA] |
◆ LED0_TOGGLE
| #define LED0_TOGGLE (LED0_PORT.OUTTGL.reg = LED0_MASK) |
◆ LED1_MASK
| #define LED1_MASK (1 << 14) |
◆ LED1_OFF
| #define LED1_OFF (LED1_PORT.OUTSET.reg = LED1_MASK) |
◆ LED1_ON
| #define LED1_ON (LED1_PORT.OUTCLR.reg = LED1_MASK) |
◆ LED1_PIN
◆ LED1_PORT
| #define LED1_PORT PORT->Group[PA] |
◆ LED1_TOGGLE
| #define LED1_TOGGLE (LED1_PORT.OUTTGL.reg = LED1_MASK) |
◆ LED2_MASK
| #define LED2_MASK (1 << 15) |
◆ LED2_OFF
| #define LED2_OFF (LED2_PORT.OUTSET.reg = LED2_MASK) |
◆ LED2_ON
| #define LED2_ON (LED2_PORT.OUTCLR.reg = LED2_MASK) |
◆ LED2_PIN
◆ LED2_PORT
| #define LED2_PORT PORT->Group[PA] |
◆ LED2_TOGGLE
| #define LED2_TOGGLE (LED2_PORT.OUTTGL.reg = LED2_MASK) |
◆ LED_BLUE_OFF
◆ LED_BLUE_ON
◆ LED_BLUE_PIN
◆ LED_BLUE_TOGGLE
◆ LED_GREEN_OFF
| #define LED_GREEN_OFF LED0_OFF |
◆ LED_GREEN_ON
| #define LED_GREEN_ON LED0_ON |
◆ LED_GREEN_PIN
| #define LED_GREEN_PIN LED0_PIN |
◆ LED_GREEN_TOGGLE
| #define LED_GREEN_TOGGLE LED0_TOGGLE |
◆ LED_RED_OFF
| #define LED_RED_OFF LED1_OFF |
◆ LED_RED_ON
| #define LED_RED_ON LED1_ON |
◆ LED_RED_PIN
| #define LED_RED_PIN LED1_PIN |
◆ LED_RED_TOGGLE
| #define LED_RED_TOGGLE LED1_TOGGLE |
◆ SARA_ENABLE_MASK
| #define SARA_ENABLE_MASK (1 << 4) |
◆ SARA_ENABLE_OFF
| #define SARA_ENABLE_OFF (SARA_ENABLE_PORT.OUTCLR.reg = SARA_ENABLE_MASK) |
◆ SARA_ENABLE_ON
| #define SARA_ENABLE_ON (SARA_ENABLE_PORT.OUTSET.reg = SARA_ENABLE_MASK) |
◆ SARA_ENABLE_PIN
◆ SARA_ENABLE_PORT
| #define SARA_ENABLE_PORT PORT->Group[PA] |
◆ SARA_R4XX_PWR_ON_MASK
| #define SARA_R4XX_PWR_ON_MASK (1 << 10) |
◆ SARA_R4XX_PWR_ON_OFF
| #define SARA_R4XX_PWR_ON_OFF (SARA_R4XX_PWR_ON_PORT.OUTCLR.reg = SARA_R4XX_PWR_ON_MASK) |
◆ SARA_R4XX_PWR_ON_ON
| #define SARA_R4XX_PWR_ON_ON (SARA_R4XX_PWR_ON_PORT.OUTSET.reg = SARA_R4XX_PWR_ON_MASK) |
◆ SARA_R4XX_PWR_ON_PIN
◆ SARA_R4XX_PWR_ON_PORT
| #define SARA_R4XX_PWR_ON_PORT PORT->Group[PB] |
◆ SARA_STATUS_PIN
This is the V_INT of the board.
Definition at line 146 of file board.h.
◆ SARA_TX_ENABLE_MASK
| #define SARA_TX_ENABLE_MASK (1 << 27) |
◆ SARA_TX_ENABLE_OFF
| #define SARA_TX_ENABLE_OFF (SARA_TX_ENABLE_PORT.OUTCLR.reg = SARA_TX_ENABLE_MASK) |
◆ SARA_TX_ENABLE_ON
| #define SARA_TX_ENABLE_ON (SARA_TX_ENABLE_PORT.OUTSET.reg = SARA_TX_ENABLE_MASK) |
◆ SARA_TX_ENABLE_PIN
◆ SARA_TX_ENABLE_PORT
| #define SARA_TX_ENABLE_PORT PORT->Group[PA] |
Include dependency graph for board.h: