uwb-dw1000 module configurations taken from decawave-uwb-dw1000/hw/drivers/uwb/uwb_dw1000 More...

Detailed Description

uwb-dw1000 module configurations taken from decawave-uwb-dw1000/hw/drivers/uwb/uwb_dw1000

Author: Francisco Molina franc.nosp@m.ois-.nosp@m.xavie.nosp@m.r.mo.nosp@m.lina@.nosp@m.inri.nosp@m.a.fr

Macros
#define	MYNEWT_VAL_UWB_DW1000_API_CHECKS (1)
	Used to check that the UWB_DEV has been setup correctly at compile time.

#define	MYNEWT_VAL_DW1000_HAL_SPI_BUFFER_SIZE (256)
	Size of spi read/write buffer, sets the maximum allowed nonblocking read operation.

#define	MYNEWT_VAL_DW1000_HAL_SPI_MAX_CNT (1024)
	The maximum number of bytes in a single transfer that the SPI hardware supports.

#define	MYNEWT_VAL_DW1000_DEVICE_SPI_RD_MAX_NOBLOCK (9)
	Max size spi read in bytes that is always done with blocking io.

#define	MYNEWT_VAL_DW1000_BIAS_CORRECTION_ENABLED (0)
	Enable range bias correction polynomial.

#define	MYNEWT_VAL_DW1000_DEVICE_TX_PWR (((float)-14.3f))
	Tx Power dBm.

#define	MYNEWT_VAL_DW1000_DEVICE_ANT_GAIN (((float)1.0f))
	Antenna Gain dB.

#define	MYNEWT_VAL_DW1000_RXTX_LEDS (1)
	Enable showing rx and tx activity on leds.

#define	MYNEWT_VAL_DW1000_RXTX_GPIO (0)
	Enable showing rx and tx activity on gpios.

#define	MYNEWT_VAL_DW1000_RNG_INDICATE_LED (0)
	Toggle LED_1 for every range packet received.

#define	MYNEWT_VAL_DW1000_CLI_EVENT_COUNTERS (0)
	Expose event counter cli api.

Macro Definition Documentation

◆ MYNEWT_VAL_DW1000_BIAS_CORRECTION_ENABLED

#define MYNEWT_VAL_DW1000_BIAS_CORRECTION_ENABLED (0)

Enable range bias correction polynomial.

Definition at line 71 of file syscfg_uwb_dw1000.h.

◆ MYNEWT_VAL_DW1000_CLI_EVENT_COUNTERS

#define MYNEWT_VAL_DW1000_CLI_EVENT_COUNTERS (0)

Expose event counter cli api.

Definition at line 113 of file syscfg_uwb_dw1000.h.

◆ MYNEWT_VAL_DW1000_DEVICE_ANT_GAIN

#define MYNEWT_VAL_DW1000_DEVICE_ANT_GAIN (((float)1.0f))

Antenna Gain dB.

Definition at line 85 of file syscfg_uwb_dw1000.h.

◆ MYNEWT_VAL_DW1000_DEVICE_SPI_RD_MAX_NOBLOCK

#define MYNEWT_VAL_DW1000_DEVICE_SPI_RD_MAX_NOBLOCK (9)

Max size spi read in bytes that is always done with blocking io.

Reads longer than this value will be done with non-blocking io.

Note: Ignore in RIOT since non-blocking SPI is not yet enabled

Definition at line 64 of file syscfg_uwb_dw1000.h.

◆ MYNEWT_VAL_DW1000_DEVICE_TX_PWR

#define MYNEWT_VAL_DW1000_DEVICE_TX_PWR (((float)-14.3f))

Tx Power dBm.

Definition at line 78 of file syscfg_uwb_dw1000.h.

◆ MYNEWT_VAL_DW1000_HAL_SPI_BUFFER_SIZE

#define MYNEWT_VAL_DW1000_HAL_SPI_BUFFER_SIZE (256)

Size of spi read/write buffer, sets the maximum allowed nonblocking read operation.

Definition at line 42 of file syscfg_uwb_dw1000.h.

◆ MYNEWT_VAL_DW1000_HAL_SPI_MAX_CNT

#define MYNEWT_VAL_DW1000_HAL_SPI_MAX_CNT (1024)

The maximum number of bytes in a single transfer that the SPI hardware supports.

Note: RIOT spi implementation will take care of splitting if this max value is exceeded. If asynchronous (non-blocking) spi is ever added to RIOT this value will need to be adapted to the platform specific value.

Definition at line 55 of file syscfg_uwb_dw1000.h.

◆ MYNEWT_VAL_DW1000_RNG_INDICATE_LED

#define MYNEWT_VAL_DW1000_RNG_INDICATE_LED (0)

Toggle LED_1 for every range packet received.

Definition at line 106 of file syscfg_uwb_dw1000.h.

◆ MYNEWT_VAL_DW1000_RXTX_GPIO

#define MYNEWT_VAL_DW1000_RXTX_GPIO (0)

Enable showing rx and tx activity on gpios.

Definition at line 99 of file syscfg_uwb_dw1000.h.

◆ MYNEWT_VAL_DW1000_RXTX_LEDS

#define MYNEWT_VAL_DW1000_RXTX_LEDS (1)

Enable showing rx and tx activity on leds.

Definition at line 92 of file syscfg_uwb_dw1000.h.

◆ MYNEWT_VAL_UWB_DW1000_API_CHECKS

#define MYNEWT_VAL_UWB_DW1000_API_CHECKS (1)

Used to check that the UWB_DEV has been setup correctly at compile time.

Note: (UWB_DEV_RXDIAG_MAXLEN > 19)

Definition at line 34 of file syscfg_uwb_dw1000.h.