STM32 Nucleo-L073RZ

Support for the STM32 Nucleo-L073RZ. More...

Detailed Description

Support for the STM32 Nucleo-L073RZ.

Overview

The Nucleo-L073RZ is a board from ST's Nucleo family supporting ARM Cortex-M0 STM32L073RZT6 microcontroller with 20KiB of RAM and 192KiB of Flash.

Pinout

Pinout for the Nucleo-L073RZ (from STM user manual UM1724, http://www.st.com/resource/en/user_manual/dm00105823.pdf, page 33)

MCU

MCU	STM32L073RZ
Family	ARM Cortex-M0+
Vendor	ST Microelectronics
RAM	20KiB
Flash	192KiB
EEPROM	6KB
Frequency	up to 32MHz
FPU	no
Timers	11 (7x 16-bit, 1x RTC, 1x Systick, 2x Watchdog)
ADCs	1x 12-bit (16 channels)
UARTs	5 (four USARTs and one Low-Power UART)
SPIs	6
I2Cs	3
Vcc	1.65V - 3.6V
Datasheet	Datasheet
Reference Manual	Reference Manual
Programming Manual	Programming Manual
Board Manual	Board Manual

Flashing the Board Using ST-LINK Removable Media

On-board ST-LINK programmer provides via composite USB device removable media. Copying the HEX file causes reprogramming of the board. This task could be performed manually; however, the cpy2remed (copy to removable media) PROGRAMMER script does this automatically. To program board in this manner, use the command:

make BOARD=nucleo-l073rz PROGRAMMER=cpy2remed flash

Note

This PROGRAMMER was tested using ST-LINK firmware 2.37.26. Firmware updates can be found on this STM webpage.

Files
file	periph_conf.h
	Peripheral MCU configuration for the nucleo-l073rz board.