Support for the HamiltonIoT Hamilton board. More...

Detailed Description

Support for the HamiltonIoT Hamilton board.

Board specific definitions for the Hamilton board

Author: Michael Andersen m.and.nosp@m.erse.nosp@m.n@cs..nosp@m.berk.nosp@m.eley..nosp@m.edu; Hyung-Sin Kim hs.ki.nosp@m.m@cs.nosp@m..berk.nosp@m.eley.nosp@m..edu

Definition in file board.h.

#include "cpu.h"
#include "periph_conf.h"
#include "periph_cpu.h"
#include "periph/gpio.h"

Include dependency graph for board.h:

This graph shows which files directly or indirectly include this file:

Go to the source code of this file.

xtimer configuration
#define	XTIMER_DEV TIMER_DEV(1)

#define	XTIMER_CHAN (0)

AT86RF233 configuration
#define	AT86RF2XX_PARAM_SPI SPI_DEV(0)

#define	AT86RF2XX_PARAM_SPI_CLK SPI_CLK_5MHZ

#define	AT86RF2XX_PARAM_CS GPIO_PIN(PB, 31)

#define	AT86RF2XX_PARAM_INT GPIO_PIN(PB, 0)

#define	AT86RF2XX_PARAM_SLEEP GPIO_PIN(PA, 20)

#define	AT86RF2XX_PARAM_RESET GPIO_PIN(PB, 15)

LED pin definitions and handlers
#define	LED0_PIN GPIO_PIN(0, 19)

#define	LED0_PORT PORT->Group[0]

#define	LED0_MASK (1 << 19)

#define	LED0_ON (LED0_PORT.OUTCLR.reg = LED0_MASK)

#define	LED0_OFF (LED0_PORT.OUTSET.reg = LED0_MASK)

#define	LED0_TOGGLE (LED0_PORT.OUTTGL.reg = LED0_MASK)

Button pin definitions
#define	BTN0_PIN GPIO_PIN(0, 18)

#define	BTN0_MODE GPIO_IN_PU

FXOS8700 configuration
Note that another fxos8700 operation option, CONFIG_FXOS8700_USE_ACC_RAW_VALUES, need to be set according to the application purposes
#define	FXOS8700_PARAM_I2C I2C_DEV(0)

#define	FXOS8700_PARAM_ADDR (0x1E)

#define	FXOS8700_PARAM_RENEW_INTERVAL (1000000ul)

HDC1080 configuration
#define	HDC1000_PARAM_I2C I2C_DEV(0)

#define	HDC1000_PARAM_ADDR (0x40)

#define	HDC1000_PARAM_RES HDC1000_14BIT

#define	HDC1000_PARAM_RENEW_INTERVAL (1000000ul)

EKMB (PIR motion sensor) configuration
#define	PIR_PARAM_GPIO GPIO_PIN(PA, 6)

#define	PIR_PARAM_ACTIVE_HIGH (1)

PULSE_COUNTER configuration
#define	PULSE_COUNTER_GPIO BTN0_PIN

#define	PULSE_COUNTER_GPIO_FLANK GPIO_FALLING

TMP00X configuration
Note that two other tmp006 operation options, TMP00X_USE_LOW_POWER and TMP00X_USE_RAW_VALUES, need to be set according to the application purpose
#define	TMP00X_PARAM_I2C I2C_DEV(0)

#define	TMP00X_PARAM_ADDR (0x44)

#define	TMP00X_PARAM_RATE TMP00X_CONFIG_CR_AS2

Macro Definition Documentation

◆ AT86RF2XX_PARAM_CS

#define AT86RF2XX_PARAM_CS GPIO_PIN(PB, 31)

Definition at line 43 of file board.h.

◆ AT86RF2XX_PARAM_INT

#define AT86RF2XX_PARAM_INT GPIO_PIN(PB, 0)

Definition at line 44 of file board.h.

◆ AT86RF2XX_PARAM_RESET

#define AT86RF2XX_PARAM_RESET GPIO_PIN(PB, 15)

Definition at line 46 of file board.h.

◆ AT86RF2XX_PARAM_SLEEP

#define AT86RF2XX_PARAM_SLEEP GPIO_PIN(PA, 20)

Definition at line 45 of file board.h.

◆ AT86RF2XX_PARAM_SPI

#define AT86RF2XX_PARAM_SPI SPI_DEV(0)

Definition at line 41 of file board.h.

◆ AT86RF2XX_PARAM_SPI_CLK

#define AT86RF2XX_PARAM_SPI_CLK SPI_CLK_5MHZ

Definition at line 42 of file board.h.

◆ BTN0_MODE

#define BTN0_MODE GPIO_IN_PU

Definition at line 68 of file board.h.

◆ BTN0_PIN

#define BTN0_PIN GPIO_PIN(0, 18)

Definition at line 67 of file board.h.

◆ FXOS8700_PARAM_ADDR

#define FXOS8700_PARAM_ADDR (0x1E)

Definition at line 78 of file board.h.

◆ FXOS8700_PARAM_I2C

#define FXOS8700_PARAM_I2C I2C_DEV(0)

Definition at line 77 of file board.h.

◆ FXOS8700_PARAM_RENEW_INTERVAL

#define FXOS8700_PARAM_RENEW_INTERVAL (1000000ul)

Definition at line 79 of file board.h.

◆ HDC1000_PARAM_ADDR

#define HDC1000_PARAM_ADDR (0x40)

Definition at line 87 of file board.h.

◆ HDC1000_PARAM_I2C

#define HDC1000_PARAM_I2C I2C_DEV(0)

Definition at line 86 of file board.h.

◆ HDC1000_PARAM_RENEW_INTERVAL

#define HDC1000_PARAM_RENEW_INTERVAL (1000000ul)

Definition at line 89 of file board.h.

◆ HDC1000_PARAM_RES

#define HDC1000_PARAM_RES HDC1000_14BIT

Definition at line 88 of file board.h.

◆ LED0_MASK

#define LED0_MASK (1 << 19)

Definition at line 56 of file board.h.

◆ LED0_OFF

#define LED0_OFF (LED0_PORT.OUTSET.reg = LED0_MASK)

Definition at line 59 of file board.h.

◆ LED0_ON

#define LED0_ON (LED0_PORT.OUTCLR.reg = LED0_MASK)

Definition at line 58 of file board.h.

◆ LED0_PIN

#define LED0_PIN GPIO_PIN(0, 19)

Definition at line 53 of file board.h.

◆ LED0_PORT

#define LED0_PORT PORT->Group[0]

Definition at line 55 of file board.h.

◆ LED0_TOGGLE

#define LED0_TOGGLE (LED0_PORT.OUTTGL.reg = LED0_MASK)

Definition at line 60 of file board.h.

◆ PIR_PARAM_ACTIVE_HIGH

#define PIR_PARAM_ACTIVE_HIGH (1)

Definition at line 97 of file board.h.

◆ PIR_PARAM_GPIO

#define PIR_PARAM_GPIO GPIO_PIN(PA, 6)

Definition at line 96 of file board.h.

◆ PULSE_COUNTER_GPIO

#define PULSE_COUNTER_GPIO BTN0_PIN

Definition at line 104 of file board.h.

◆ PULSE_COUNTER_GPIO_FLANK

#define PULSE_COUNTER_GPIO_FLANK GPIO_FALLING

Definition at line 105 of file board.h.

◆ TMP00X_PARAM_ADDR

#define TMP00X_PARAM_ADDR (0x44)

Definition at line 115 of file board.h.

◆ TMP00X_PARAM_I2C

#define TMP00X_PARAM_I2C I2C_DEV(0)

Definition at line 114 of file board.h.

◆ TMP00X_PARAM_RATE

#define TMP00X_PARAM_RATE TMP00X_CONFIG_CR_AS2

Definition at line 116 of file board.h.

◆ XTIMER_CHAN

#define XTIMER_CHAN (0)

Definition at line 34 of file board.h.

◆ XTIMER_DEV

#define XTIMER_DEV TIMER_DEV(1)

Definition at line 33 of file board.h.