board.h

Go to the documentation of this file.

/*
 * Copyright (C) 2016 UC Berkeley
 *
 * This file is subject to the terms and conditions of the GNU Lesser
 * General Public License v2.1. See the file LICENSE in the top level
 * directory for more details.
 */
 
#ifndef BOARD_H
#define BOARD_H
 
#include "cpu.h"
#include "periph_conf.h"
#include "periph_cpu.h"
#include "periph/gpio.h"
 
#ifdef __cplusplus
extern "C" {
#endif
 
#define XTIMER_DEV          TIMER_DEV(1)
#define XTIMER_CHAN         (0)
#define AT86RF2XX_PARAM_SPI      SPI_DEV(0)
#define AT86RF2XX_PARAM_SPI_CLK  SPI_CLK_5MHZ
#define AT86RF2XX_PARAM_CS       GPIO_PIN(PB, 31)
#define AT86RF2XX_PARAM_INT      GPIO_PIN(PB, 0)
#define AT86RF2XX_PARAM_SLEEP    GPIO_PIN(PA, 20)
#define AT86RF2XX_PARAM_RESET    GPIO_PIN(PB, 15)
#define LED0_PIN                 GPIO_PIN(0, 19)
 
#define LED0_PORT                PORT->Group[0]
#define LED0_MASK                (1 << 19)
 
#define LED0_ON                  (LED0_PORT.OUTCLR.reg = LED0_MASK)
#define LED0_OFF                 (LED0_PORT.OUTSET.reg = LED0_MASK)
#define LED0_TOGGLE              (LED0_PORT.OUTTGL.reg = LED0_MASK)
#define BTN0_PIN                 GPIO_PIN(0, 18)
#define BTN0_MODE                GPIO_IN_PU
#define FXOS8700_PARAM_I2C            I2C_DEV(0)
#define FXOS8700_PARAM_ADDR           (0x1E)
#define FXOS8700_PARAM_RENEW_INTERVAL (1000000ul)
#define HDC1000_PARAM_I2C             I2C_DEV(0)
#define HDC1000_PARAM_ADDR            (0x40)
#define HDC1000_PARAM_RES             HDC1000_14BIT
#define HDC1000_PARAM_RENEW_INTERVAL  (1000000ul)
#define PIR_PARAM_GPIO          GPIO_PIN(PA, 6)
#define PIR_PARAM_ACTIVE_HIGH   (1)
#define PULSE_COUNTER_GPIO          BTN0_PIN
#define PULSE_COUNTER_GPIO_FLANK    GPIO_FALLING
#define TMP00X_PARAM_I2C            I2C_DEV(0)
#define TMP00X_PARAM_ADDR           (0x44)
#define TMP00X_PARAM_RATE           TMP00X_CONFIG_CR_AS2
#ifdef __cplusplus
}
#endif
 
#endif /* BOARD_H */