Loading...
Searching...
No Matches
gpio_params.h
Go to the documentation of this file.
1/*
2 * SPDX-FileCopyrightText: 2018 Inria
3 * SPDX-License-Identifier: LGPL-2.1-only
4 */
5
6#pragma once
7
17
18#include "board.h"
19#include "saul/periph.h"
20
21#ifdef __cplusplus
22extern "C" {
23#endif
24
29{
30 {
31 .name = "LED 1",
32 .pin = LED0_PIN,
33 .mode = GPIO_OUT,
35 },
36 {
37 .name = "LED 2",
38 .pin = LED1_PIN,
39 .mode = GPIO_OUT,
41 },
42 {
43 .name = "LED 3",
44 .pin = LED2_PIN,
45 .mode = GPIO_OUT,
47 },
48 {
49 .name = "LED 4",
50 .pin = LED3_PIN,
51 .mode = GPIO_OUT,
53 },
54 {
55 .name = "Button 1",
56 .pin = BTN0_PIN,
57 .mode = BTN0_MODE,
58 .flags = SAUL_GPIO_INVERTED,
59 },
60 {
61 .name = "Button 2",
62 .pin = BTN1_PIN,
63 .mode = BTN1_MODE,
64 .flags = SAUL_GPIO_INVERTED,
65 },
66 {
67 .name = "Button 3",
68 .pin = BTN2_PIN,
69 .mode = BTN2_MODE,
70 .flags = SAUL_GPIO_INVERTED,
71 },
72 {
73 .name = "Button 4",
74 .pin = BTN3_PIN,
75 .mode = BTN3_MODE,
76 .flags = SAUL_GPIO_INVERTED,
77 },
78};
79
80#ifdef __cplusplus
81}
82#endif
83
static const saul_gpio_params_t saul_gpio_params[]
LED configuration.
Definition gpio_params.h:29
#define BTN1_MODE
Button B mode.
Definition board.h:44
#define BTN1_PIN
Button B pin.
Definition board.h:43
#define LED2_PIN
RX LED yellow.
Definition board.h:32
#define BTN2_PIN
Button 2 pin.
Definition board.h:57
#define BTN2_MODE
Button 2 mode.
Definition board.h:58
@ GPIO_OUT
select GPIO MASK as output
Definition periph_cpu.h:164
Board specific configuration for the nRF51DK.
Parameter definitions for mapping peripherals directly to SAUL.
@ SAUL_GPIO_INIT_CLEAR
set pin inactive after init
Definition periph.h:43
@ SAUL_GPIO_INVERTED
pin is used as inverted
Definition periph.h:42
Direct mapped GPIO configuration values.
Definition periph.h:50