A global network packet buffer.
More...
A global network packet buffer.
- Note
- WARNING!! Do not store data structures that are not packed (defined with
__attribute__((packed))
) or enforce alignment in in any way in here if CONFIG_GNRC_PKTBUF_SIZE > 0. On some RISC architectures this will lead to alignment problems and can potentially result in segmentation/hard faults and other unexpected behaviour.
|
void | gnrc_pktbuf_init (void) |
| Initializes packet buffer module.
|
|
gnrc_pktsnip_t * | gnrc_pktbuf_add (gnrc_pktsnip_t *next, const void *data, size_t size, gnrc_nettype_t type) |
| Adds a new gnrc_pktsnip_t and its packet to the packet buffer.
|
|
gnrc_pktsnip_t * | gnrc_pktbuf_mark (gnrc_pktsnip_t *pkt, size_t size, gnrc_nettype_t type) |
| Marks the first size bytes in a received packet with a new packet snip that is appended to the packet.
|
|
int | gnrc_pktbuf_realloc_data (gnrc_pktsnip_t *pkt, size_t size) |
| Reallocates gnrc_pktsnip_t::data of pkt in the packet buffer, without changing the content.
|
|
void | gnrc_pktbuf_hold (gnrc_pktsnip_t *pkt, unsigned int num) |
| Increases gnrc_pktsnip_t::users of pkt atomically.
|
|
void | gnrc_pktbuf_release_error (gnrc_pktsnip_t *pkt, uint32_t err) |
| Decreases gnrc_pktsnip_t::users of pkt atomically and removes it if it reaches 0 and reports a possible error through an error code, if Error reporting is included.
|
|
static void | gnrc_pktbuf_release (gnrc_pktsnip_t *pkt) |
| Decreases gnrc_pktsnip_t::users of pkt atomically and removes it if it reaches 0 and reports GNRC_NETERR_SUCCESS.
|
|
gnrc_pktsnip_t * | gnrc_pktbuf_start_write (gnrc_pktsnip_t *pkt) |
| Must be called once before there is a write operation on a packet snip in a thread.
|
|
gnrc_pktsnip_t * | gnrc_pktbuf_remove_snip (gnrc_pktsnip_t *pkt, gnrc_pktsnip_t *snip) |
| Deletes a snip from a packet and the packet buffer.
|
|
gnrc_pktsnip_t * | gnrc_pktbuf_reverse_snips (gnrc_pktsnip_t *pkt) |
| Reverses snip order of a packet in a write-protected manner.
|
|
int | gnrc_pktbuf_merge (gnrc_pktsnip_t *pkt) |
| Merge pktsnip chain to single pktsnip.
|
|
void | gnrc_pktbuf_stats (void) |
| Prints some statistics about the packet buffer to stdout.
|
|
bool | gnrc_pktbuf_is_empty (void) |
| Checks if packet buffer is empty.
|
|
bool | gnrc_pktbuf_is_sane (void) |
| Checks if the implementation's internal invariants still uphold.
|
|
◆ gnrc_pktbuf_add()
Adds a new gnrc_pktsnip_t and its packet to the packet buffer.
- Warning
- Do not change the fields of the gnrc_pktsnip_t created by this function externally. This will most likely create memory leaks or not allowed memory access.
- Precondition
- size < CONFIG_GNRC_PKTBUF_SIZE
- Parameters
-
[in] | next | Next gnrc_pktsnip_t in the packet. Leave NULL if you want to create a new packet. |
[in] | data | Data of the new gnrc_pktsnip_t. If data is NULL no data will be inserted into result . |
[in] | size | Length of data . If this value is 0 the gnrc_pktsnip::data field of the newly created snip will be NULL. |
[in] | type | Protocol type of the gnrc_pktsnip_t. |
- Returns
- Pointer to the packet part that represents the new gnrc_pktsnip_t.
-
NULL, if no space is left in the packet buffer.
◆ gnrc_pktbuf_hold()
◆ gnrc_pktbuf_is_empty()
bool gnrc_pktbuf_is_empty |
( |
void |
| ) |
|
Checks if packet buffer is empty.
- Returns
- true, if packet buffer is empty
-
false, if packet buffer is not empty
◆ gnrc_pktbuf_is_sane()
bool gnrc_pktbuf_is_sane |
( |
void |
| ) |
|
Checks if the implementation's internal invariants still uphold.
- Returns
- true, the packet buffer is sane.
-
false, the packet buffer is insane.
◆ gnrc_pktbuf_mark()
Marks the first size
bytes in a received packet with a new packet snip that is appended to the packet.
Graphically this can be represented as follows:
Before After
====== =====
(next)
pkt->data result->data <== pkt->data
v v v
+--------------------------------+ +----------------+---------------+
+--------------------------------+ +----------------+---------------+
\__________pkt->size___________/ \_result->size_/ \__pkt->size__/
If size == pkt->size
then the resulting snip will point to NULL in its gnrc_pktsnip_t::data field and its gnrc_pktsnip_t::size field will be 0.
- Precondition
pkt
!= NULL && size
!= 0
- Parameters
-
[in] | pkt | A received packet. |
[in] | size | The size of the new packet snip. |
[in] | type | The type of the new packet snip. |
- Note
- It's not guaranteed that
result->data
points to the same address as the original pkt->data
.
- Returns
- The new packet snip in
pkt
on success.
-
NULL, if pkt == NULL or size == 0 or size > pkt->size or pkt->data == NULL.
-
NULL, if no space is left in the packet buffer.
◆ gnrc_pktbuf_merge()
Merge pktsnip chain to single pktsnip.
Specifically it calls gnrc_pktbuf_realloc_data() on pkt
, then copies the data of all following packet snips into that reallocated space, and removes the packet snip the data was copied from afterwards.
Example
Input
buffer
+---------------------------+ +------+
| size = 8 | data +-------->| |
| type = NETTYPE_IPV6 |------------+ +------+
+---------------------------+ . .
| next . .
v . .
+---------------------------+ +------+
| size = 40 | data +----------->| |
| type = NETTYPE_UDP |---------+ +------+
+---------------------------+ . .
| next . .
v
+---------------------------+ +------+
| size = 14 | data +-------------->| |
| type = NETTYPE_UNDEF |------+ +------+
+---------------------------+ . .
Output
buffer
+---------------------------+ +------+
| size = 62 | data +-------->| |
| type = NETTYPE_IPV6 |------------+ | |
+---------------------------+ | |
| |
| |
| |
+------+
. .
- Warning
pkt
needs to write protected before calling this function.
- Note
- Packets in receive order need to call gnrc_pktbuf_reverse_snips() first to get the data in the correct order.
- Parameters
-
[in,out] | pkt | The snip to merge. |
- Returns
- 0, on success
-
ENOMEM, if no space is left in the packet buffer.
◆ gnrc_pktbuf_realloc_data()
Reallocates gnrc_pktsnip_t::data of pkt
in the packet buffer, without changing the content.
- Precondition
pkt != NULL
-
(pkt->size > 0) <=> (pkt->data != NULL)
-
gnrc_pktsnip_t::data of
pkt
is in the packet buffer if it is not NULL.
If enough memory is available behind it or size
is smaller than the original size of the packet then gnrc_pktsnip_t::data of pkt
will not be moved. Otherwise, it will be moved. If no space is available nothing happens.
- Parameters
-
[in] | pkt | A packet part. |
[in] | size | The size for pkt . |
- Returns
- 0, on success
-
ENOMEM, if no space is left in the packet buffer.
◆ gnrc_pktbuf_release()
◆ gnrc_pktbuf_release_error()
Decreases gnrc_pktsnip_t::users of pkt
atomically and removes it if it reaches 0 and reports a possible error through an error code, if Error reporting is included.
- Precondition
- All snips of
pkt
must be in the packet buffer.
- Parameters
-
[in] | pkt | A packet. |
[in] | err | An error code. |
◆ gnrc_pktbuf_remove_snip()
Deletes a snip from a packet and the packet buffer.
- Parameters
-
[in] | pkt | A packet. |
[in] | snip | A snip in the packet. |
- Returns
- The new reference to
pkt
.
◆ gnrc_pktbuf_reverse_snips()
Reverses snip order of a packet in a write-protected manner.
This can be used to change the send/receive order of a packet (see gnrc_pktsnip_t)
- Note
pkt
is released on failure.
- Parameters
-
[in] | pkt | A packet. When this function fails (due to a full packet packet buffer) pkt will be released. |
- Returns
- The reversed version of
pkt
on success
-
NULL, when there is not enough space in the packet buffer to reverse the packet in a write-protected manner.
pkt
is released in that case.
◆ gnrc_pktbuf_start_write()
Must be called once before there is a write operation on a packet snip in a thread.
This function duplicates a packet snip in the packet buffer (both the instance of the gnrc_pktsnip_t and its data) if gnrc_pktsnip_t::users of pkt
> 1.
- Parameters
-
[in] | pkt | The packet snip you want to write into. |
- Returns
- The (new) pointer to the packet snip.
-
NULL, if gnrc_pktsnip_t::users of
pkt
> 1 and if there is not enough space in the packet buffer.
◆ gnrc_pktbuf_stats()
void gnrc_pktbuf_stats |
( |
void |
| ) |
|
Prints some statistics about the packet buffer to stdout.
- Note
- Only available with DEVELHELP defined.
Statistics include maximum number of reserved bytes.