periph_conf.h

Go to the documentation of this file.

/*
 * SPDX-FileCopyrightText: 2014 Freie Universität Berlin
 * SPDX-FileCopyrightText: 2018 HAW Hamburg
 * SPDX-License-Identifier: LGPL-2.1-only
 */
 
#pragma once

 
#include "cc2538_gpio.h"
#include "periph_cpu.h"
 
#include "cfg_clk_default.h"
#include "cfg_timer_default.h"
 
#ifdef __cplusplus
 extern "C" {
#endif

#define SOC_ADC_ADCCON3_EREF  SOC_ADC_ADCCON3_EREF_AVDD5
 
static const adc_conf_t adc_config[] = {
    GPIO_PIN(1, 0), 
    GPIO_PIN(1, 1), 
    GPIO_PIN(1, 2), 
    GPIO_PIN(1, 3), 
    GPIO_PIN(2, 3), 
    GPIO_PIN(0, 7), 
 
};
 
#define ADC_NUMOF           ARRAY_SIZE(adc_config)

static const uart_conf_t uart_config[] = {
    {
        .dev      = UART0_BASEADDR,
        .rx_pin   = GPIO_PIN(0, 0),
        .tx_pin   = GPIO_PIN(0, 1),
#ifdef MODULE_PERIPH_UART_HW_FC
        .cts_pin  = GPIO_UNDEF,
        .rts_pin  = GPIO_UNDEF
#endif
    }
};
 
/* interrupt function name mapping */
#define UART_0_ISR          isr_uart0
 
/* macros common across all UARTs */
#define UART_NUMOF          ARRAY_SIZE(uart_config)

#define I2C_IRQ_PRIO            1
 
static const i2c_conf_t i2c_config[] = {
    {
        .speed = I2C_SPEED_FAST,    
        .scl_pin = GPIO_PIN(1, 5),  /* SI7006 Temp/RH sensor */
        .sda_pin = GPIO_PIN(1, 4)   /* SI7006 Temp/RH sensor */
    },
};
 
#define I2C_NUMOF               ARRAY_SIZE(i2c_config)

static const spi_conf_t spi_config[] = {
    {
        .num      = 0,
        .mosi_pin = GPIO_PIN(0, 5),
        .miso_pin = GPIO_PIN(0, 4),
        .sck_pin  = GPIO_PIN(0, 2),
        .cs_pin   = GPIO_PIN(0, 3)
    },
};
 
#define SPI_NUMOF           ARRAY_SIZE(spi_config)
 
#ifdef __cplusplus
} /* end extern "C" */
#endif