- Generated on Fri Nov 15 2024 13:54:46 by
1.9.8
List of available configuration options for the Netdev - Network Device Driver API and the GNRC communication interface. More...
List of available configuration options for the Netdev - Network Device Driver API and the GNRC communication interface.
Files | |
| file | netopt.h |
| Definition of global configuration options. | |
Data Structures | |
| struct | netopt_scan_result |
| Basic network scan result. More... | |
| struct | netopt_scan_request |
| Basic network scan request. More... | |
| struct | netopt_connect_result |
| Basic network connect result. More... | |
| struct | netopt_disconnect_result |
| Basic disconnect result. More... | |
| struct | netopt_connect_request |
| Basic network connect request. More... | |
| struct | netopt_disconnect_request |
| Basic network disconnect request. More... | |
Macros | |
| #define | NETOPT_SCAN_REQ_ALL_CH ((netopt_channel_t)(-1)) |
| Request to scan all channels. | |
| #define | NETOPT_SCAN_RESULT_INITIALIZER(ch, str) |
| Static initializer for a netopt_scan_result_t. | |
| #define | NETOPT_SCAN_REQUEST_INITIALIZER(ch, cb) |
| Static initializer for a netopt_scan_request_t. | |
| #define | NETOPT_CONNECT_RESULT_INITIALIZER(ch) |
| Static initializer for a netopt_connect_result_t. | |
| #define | NETOPT_DISCONNECT_RESULT_INITIALIZER(ch) |
| Static initializer for a netopt_disconnect_result_t. | |
| #define | NETOPT_CONNECT_REQUEST_INITIALIZER(ch, ccb, dcb) |
| Static initializer for a netopt_connect_request_t. | |
| #define | NETOPT_DISCONNECT_REQUEST_INITIALIZER(dcb) |
| Static initializer for a netopt_disconnect_request_t. | |
Typedefs | |
| typedef uint16_t | netopt_channel_t |
| Netopt RF channel type. | |
| typedef int16_t | netopt_rssi_t |
| Netopt RSSI type. | |
| typedef struct netopt_scan_result | netopt_scan_result_t |
| Basic network scan result. | |
| typedef void(* | netopt_on_scan_result_t) (void *netif, const struct l2scan_list *res) |
| Basic callback type on network scan NETOPT_CONNECT. | |
| typedef struct netopt_scan_request | netopt_scan_request_t |
| Basic network scan request. | |
| typedef struct netopt_connect_result | netopt_connect_result_t |
| Basic network connect result. | |
| typedef struct netopt_disconnect_result | netopt_disconnect_result_t |
| Basic disconnect result. | |
| typedef void(* | netopt_on_connect_result_t) (void *netif, const struct netopt_connect_result *res) |
| Basic callback type on network connection NETOPT_CONNECT. | |
| typedef void(* | netopt_on_disconnect_result_t) (void *netif, const struct netopt_disconnect_result *res) |
| Basic callback type on network disconnection NETOPT_CONNECT. | |
| typedef struct netopt_connect_request | netopt_connect_request_t |
| Basic network connect request. | |
| typedef struct netopt_disconnect_request | netopt_disconnect_request_t |
| Basic network disconnect request. | |
Functions | |
| const char * | netopt2str (netopt_t opt) |
| Get a string ptr corresponding to opt, for debugging. | |
| #define NETOPT_CONNECT_REQUEST_INITIALIZER | ( | ch, | |
| ccb, | |||
| dcb | |||
| ) |
Static initializer for a netopt_connect_request_t.
| ch | Channel of the network to connect to |
| ccb | On connect callback |
| dcb | On disconnect callback |
| #define NETOPT_CONNECT_RESULT_INITIALIZER | ( | ch | ) |
Static initializer for a netopt_connect_result_t.
| ch | Connected channel |
| #define NETOPT_DISCONNECT_REQUEST_INITIALIZER | ( | dcb | ) |
Static initializer for a netopt_disconnect_request_t.
| dcb | On disconnect callback |
| #define NETOPT_DISCONNECT_RESULT_INITIALIZER | ( | ch | ) |
Static initializer for a netopt_disconnect_result_t.
| ch | Channel of the disconnected AP |
| #define NETOPT_SCAN_REQ_ALL_CH ((netopt_channel_t)(-1)) |
| #define NETOPT_SCAN_REQUEST_INITIALIZER | ( | ch, | |
| cb | |||
| ) |
Static initializer for a netopt_scan_request_t.
| ch | Channel to be scanned |
| cb | Scan result callback |
| #define NETOPT_SCAN_RESULT_INITIALIZER | ( | ch, | |
| str | |||
| ) |
Static initializer for a netopt_scan_result_t.
| ch | Scanned channel |
| str | Received signal strength |
| typedef uint16_t netopt_channel_t |
| typedef void(* netopt_on_connect_result_t) (void *netif, const struct netopt_connect_result *res) |
Basic callback type on network connection NETOPT_CONNECT.
| typedef void(* netopt_on_disconnect_result_t) (void *netif, const struct netopt_disconnect_result *res) |
Basic callback type on network disconnection NETOPT_CONNECT.
| typedef void(* netopt_on_scan_result_t) (void *netif, const struct l2scan_list *res) |
Basic callback type on network scan NETOPT_CONNECT.
| typedef int16_t netopt_rssi_t |
| enum netopt_enable_t |
| enum netopt_rf_testmode_t |
Option parameter to be used with NETOPT_RF_TESTMODE.
| enum netopt_state_t |
Option parameter to be used with NETOPT_STATE to set or get the state of a network device or protocol implementation.
| Enumerator | |
|---|---|
| NETOPT_STATE_OFF | powered off |
| NETOPT_STATE_SLEEP | sleep mode |
| NETOPT_STATE_IDLE | idle mode, the device listens to receive packets |
| NETOPT_STATE_RX | receive mode, the device currently receives a packet |
| NETOPT_STATE_TX | transmit mode, set: triggers transmission of a preloaded packet (see NETOPT_PRELOADING*). The resulting state of the network device is NETOPT_STATE_IDLE get: the network device is in the process of transmitting a packet |
| NETOPT_STATE_RESET | triggers a hardware reset. The resulting state of the network device is NETOPT_STATE_IDLE |
| NETOPT_STATE_STANDBY | standby mode. The devices is awake but not listening to packets. |
| enum netopt_t |
Global list of configuration options available throughout the network stack, e.g.
by netdev and netapi
The data type specified in parentheses for each individual option is the data type to use for the argument when getting/setting the value of the option.
All arguments longer than 1 byte (e.g. uint16_t) are given in host byte order unless anything else is specified below.
| Enumerator | ||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NETOPT_CHANNEL | (uint16_t) channel number | |||||||||||||||||||||
| NETOPT_IS_CHANNEL_CLR | (netopt_enable_t) check whether the network medium is clear Getting this option can be used to trigger a manual clear channel assessment (CCA) on some wireless devices. | |||||||||||||||||||||
| NETOPT_ADDRESS | (byte array, see below) link layer address in network byte order
| |||||||||||||||||||||
| NETOPT_ADDRESS_LONG | (byte array, see below) long link layer address in network byte order
| |||||||||||||||||||||
| NETOPT_ADDR_LEN | (uint16_t) get the default address length a network device expects | |||||||||||||||||||||
| NETOPT_SRC_LEN | (uint16_t) address length to use for the link layer source address | |||||||||||||||||||||
| NETOPT_NID | (uint16_t) network ID Examples for this include the PAN ID in IEEE 802.15.4 and netid in LoRaWAN (uint32_t in this case) | |||||||||||||||||||||
| NETOPT_HOP_LIMIT | (uint8_t) hop limit | |||||||||||||||||||||
| NETOPT_IPV6_IID | (eui64_t) get the IPv6 interface identifier of a network interface
The generation of the interface identifier is dependent on the link-layer. Please refer to the appropriate IPv6 over | |||||||||||||||||||||
| NETOPT_IPV6_ADDR | (ipv6_addr_t[]) get IPv6 addresses of an interface as array of ipv6_addr_t or add an IPv6 address as ipv6_addr_t to an interface When adding an IPv6 address to a GNRC interface using GNRC_NETAPI_MSG_TYPE_SET, the gnrc_netapi_opt_t::context field can be used to pass the prefix length (8 MSB) and some flags (8 LSB) according to net_gnrc_netif_ipv6_addrs_flags. The address is however always considered to be manually added. When getting the option you can pass an array of ipv6_addr_t of any length greater than 0 to the getter. The array will be filled up to to its maximum and the remaining addresses on the interface will be ignored | |||||||||||||||||||||
| NETOPT_IPV6_ADDR_REMOVE | (ipv6_addr_t) Removes an IPv6 address from an interface | |||||||||||||||||||||
| NETOPT_IPV6_ADDR_FLAGS | (array of uint8_t) get the flags to the addresses returned by NETOPT_IPV6_ADDR as array The information contained in the array is very specific to the interface's API. For GNRC e.g. the values are according to net_gnrc_netif_ipv6_addrs_flags. | |||||||||||||||||||||
| NETOPT_IPV6_GROUP | (ipv6_addr_t) get IPv6 multicast groups of an interface as array of ipv6_addr_t or join an IPv6 multicast group as ipv6_addr_t on an interface When adding an IPv6 address to a GNRC interface using GNRC_NETAPI_MSG_TYPE_SET, the gnrc_netapi_opt_t::context field can be used to pass the prefix length (8 MSB) and some flags (8 LSB) according to net_gnrc_netif_ipv6_addrs_flags. The address is however always considered to be manually added. When getting the option you can pass an array of ipv6_addr_t of any length greater than 0 to the getter. The array will be filled up to to its maximum and the remaining addresses on the interface will be ignored | |||||||||||||||||||||
| NETOPT_IPV6_GROUP_LEAVE | (ipv6_addr_t) Leave an IPv6 multicast group on an interface | |||||||||||||||||||||
| NETOPT_IPV6_FORWARDING | (netopt_enable_t) IPv6 forwarding state | |||||||||||||||||||||
| NETOPT_IPV6_SND_RTR_ADV | (netopt_enable_t) sending of IPv6 router advertisements | |||||||||||||||||||||
| NETOPT_TX_POWER | (int16_t) transmit power for radio devices in dBm | |||||||||||||||||||||
| NETOPT_MAX_PDU_SIZE | (uint16_t) maximum protocol data unit | |||||||||||||||||||||
| NETOPT_PDU_SIZE | (uint16_t) protocol data unit size When set, fixes the number of bytes to be received. This is required for MAC layers with implicit header mode (no packet length information in PDDU) and predictable packet length (e.g LoRaWAN beacons). The device driver implementation should attempt to read exactly the expected number of bytes (possibly filling it up with garbage data if the payload is smaller). When get, returns the number of expected bytes for the next reception. In some MAC layers it will only be effective if used in conjunction with NETOPT_FIXED_HEADER | |||||||||||||||||||||
| NETOPT_PRELOADING | (netopt_enable_t) frame preloading Preload frame data using gnrc_netdev_driver_t::send_data() or gnrc_netapi_send(), trigger sending by setting state to NETOPT_STATE_TX | |||||||||||||||||||||
| NETOPT_PROMISCUOUSMODE | (netopt_enable_t) promiscuous mode | |||||||||||||||||||||
| NETOPT_AUTOACK | (netopt_enable_t) automatic link layer ACKs | |||||||||||||||||||||
| NETOPT_ACK_PENDING | (netopt_enable_t) frame pending bit of ACKs For IEEE 802.15.4, this bit is copied into the frame pending subfield of the ACK if it is the response to a data request MAC command frame. | |||||||||||||||||||||
| NETOPT_ACK_REQ | (netopt_enable_t) acknowledgement request on outgoing frames For IEEE 802.15.4, this bit is copied into the ACK req subfield of the frame control field. | |||||||||||||||||||||
| NETOPT_RETRANS | (uint8_t) maximum number of retransmissions | |||||||||||||||||||||
| NETOPT_PROTO | (gnrc_nettype_t) the protocol for the layer | |||||||||||||||||||||
| NETOPT_STATE | (netopt_state_t) state of network device | |||||||||||||||||||||
| NETOPT_RAWMODE | (netopt_enable_t) when enabled, bypass protocol processing of incoming frames | |||||||||||||||||||||
| NETOPT_RX_START_IRQ | (netopt_enable_t) Used to check if the driver generates NETDEV_EVENT_RX_STARTED events It is mostly triggered after the preamble is correctly received
| |||||||||||||||||||||
| NETOPT_TX_START_IRQ | (netopt_enable_t) Used to check if the driver generates NETDEV_EVENT_TX_STARTED events This interrupt is triggered when the transceiver starts to send out the frame.
| |||||||||||||||||||||
| NETOPT_TX_END_IRQ | (netopt_enable_t) Used to check if the driver generates NETDEV_EVENT_TX_COMPLETE events This interrupt is triggered when the full frame has been transmitted.
| |||||||||||||||||||||
| NETOPT_AUTOCCA | (netopt_enable_t) perform channel clear assessment before transmitting This may be a hardware feature of the given transceiver, or might be otherwise implemented in software. If the device supports CSMA this option will enable CSMA with a certain set of parameters to emulate the desired behaviour.
| |||||||||||||||||||||
| NETOPT_LINK | (netopt_enable_t) network interface link status. This option is used to set or check the link status (up or down).
| |||||||||||||||||||||
| NETOPT_ACTIVE | (netopt_enable_t) network interface status. This option is used check state or to enable/disable the interface, regardless of link status.
| |||||||||||||||||||||
| NETOPT_CSMA | (netopt_enable_t) CSMA/CA support If the device supports CSMA in hardware, this option enables it with default parameters. For further configuration refer to the other NETOPT_CSMA_* options. | |||||||||||||||||||||
| NETOPT_CSMA_RETRIES | (uint8_t) maximum number of CSMA retries The maximum number of backoffs the CSMA-CA algorithm will attempt before declaring a channel access failure. Named macMaxCsmaBackoffs in IEEE Std 802.15.4-2015. IEEE 802.15.4 default: 4 | |||||||||||||||||||||
| NETOPT_CSMA_MAXBE | (uint8_t) maximum backoff exponent for the CSMA-CA algorithm Named macMaxBE in IEEE Std 802.15.4-2015. IEEE 802.15.4 default: 5 | |||||||||||||||||||||
| NETOPT_CSMA_MINBE | (uint8_t) minimum backoff exponent for the CSMA-CA algorithm Named macMinBE in IEEE Std 802.15.4-2015. IEEE 802.15.4 default: 3 | |||||||||||||||||||||
| NETOPT_MAC_NO_SLEEP | (netopt_enable_t) block transceiver sleep Enabling this option tells the MAC layer to never put the radio to sleep. Useful in gateways and routers not running on batteries to improve responsiveness and allow battery powered nodes on the same network to sleep more often. | |||||||||||||||||||||
| NETOPT_IS_WIRED | (netopt_enable_t) read-only check for a wired interface. This option will return -ENOTSUP for wireless interfaces.
| |||||||||||||||||||||
| NETOPT_DEVICE_TYPE | (uint16_t) device type e.g. NETDEV_TYPE_ETHERNET, NETDEV_TYPE_IEEE802154, etc. | |||||||||||||||||||||
| NETOPT_CHANNEL_PAGE | (uint16_t) channel page as defined by IEEE 802.15.4 | |||||||||||||||||||||
| NETOPT_CCA_THRESHOLD | (int8_t) CCA threshold for the radio transceiver This is the value, in dBm, that the radio transceiver uses to decide whether the channel is clear or not (CCA). If the current signal strength (RSSI/ED) is stronger than this CCA threshold value, the transceiver usually considers that the radio medium is busy. Otherwise, i.e. if RSSI/ED value is less than the CCA threshold value, the radio medium is supposed to be free (the possibly received weak signal is considered to be background, meaningless noise). Most transceivers allow to set this CCA threshold value. Some research work has proven that dynamically adapting it to network environment can improve QoS, especially in WSN. | |||||||||||||||||||||
| NETOPT_CCA_MODE | (uint8_t) CCA mode for the radio transceiver Get/set the CCA mode corresponding to the respective PHY standard.
| |||||||||||||||||||||
| NETOPT_STATS | (netstats_t) get statistics about sent and received packets and data of the device or protocol A get operation expects a netstats_t and will copy the current statistics into it, atomically. A set operation resets the statistics (zeros it out) regardless of the parameter given. | |||||||||||||||||||||
| NETOPT_ENCRYPTION | (netopt_enable_t) link layer encryption. | |||||||||||||||||||||
| NETOPT_ENCRYPTION_KEY | (byte array) set encryption key The required byte array size is dependent on encryption algorithm and device. | |||||||||||||||||||||
| NETOPT_RF_TESTMODE | (netopt_rf_testmode_t) Test mode for the radio, e.g. for CE or FCC certification Get/set the test mode as type netopt_rf_testmode_t or as uint8_t if the radio supports other vendor specific test modes.
| |||||||||||||||||||||
| NETOPT_L2FILTER | (l2filter_t) add an address to a link layer filter list
Getting this option from a device will return a pointer of type l2filter_t to the first entry of a filter list. When setting this option a pointer to an link layer address as well as the length of the address are expected as parameters. | |||||||||||||||||||||
| NETOPT_L2FILTER_RM | (l2filter_t) remove an address from a link layer filter list
Getting this value always returns -ENOTSUP. When setting this option a pointer to an link layer address as well as the length of the address are expected as parameters. Setting this option will lead to the given address being removed from the filer list. | |||||||||||||||||||||
| NETOPT_LAST_ED_LEVEL | (int8_t) Energy level during the last performed CCA or RX frame Get the last ED level available as an int8_t. The source of the measurement is unspecified and may come from the latest CCA measurement (CCA mode 1), or from the last received frame. | |||||||||||||||||||||
| NETOPT_PREAMBLE_LENGTH | (uint16_t) preamble length | |||||||||||||||||||||
| NETOPT_INTEGRITY_CHECK | (netopt_enable_t) frame integrity check (e.g CRC) | |||||||||||||||||||||
| NETOPT_CHANNEL_FREQUENCY | (uint32_t) channel center frequency For example, with LoRa, this corresponds to the center frequency of each channel (867300000, etc) for a given frequency band (868, 915, etc). | |||||||||||||||||||||
| NETOPT_CHANNEL_HOP | (netopt_enable_t) channel hopping | |||||||||||||||||||||
| NETOPT_CHANNEL_HOP_PERIOD | (uint8_t) channel hopping period | |||||||||||||||||||||
| NETOPT_SINGLE_RECEIVE | (netopt_enable_t) single frame reception If enabled, RX is turned off upon reception of a frame | |||||||||||||||||||||
| NETOPT_RX_TIMEOUT | (uint32_t) reception timeout of a frame
| |||||||||||||||||||||
| NETOPT_TX_TIMEOUT | (uint32_t) transmission timeout of a frame
| |||||||||||||||||||||
| NETOPT_BANDWIDTH | (uint8_t) radio modulation bandwidth | |||||||||||||||||||||
| NETOPT_SPREADING_FACTOR | (uint8_t) radio spreading factor | |||||||||||||||||||||
| NETOPT_CODING_RATE | (uint8_t) radio coding rate | |||||||||||||||||||||
| NETOPT_FIXED_HEADER | (netopt_enable_t) fixed header mode | |||||||||||||||||||||
| NETOPT_IQ_INVERT | (netopt_enable_t) IQ inverted | |||||||||||||||||||||
| NETOPT_6LO | (netopt_enable_t) 6Lo support
| |||||||||||||||||||||
| NETOPT_6LO_IPHC | (netopt_enable_t) header compression
| |||||||||||||||||||||
| NETOPT_TX_RETRIES_NEEDED | (uint8_t) retry amount from missing ACKs of the last transmission This retrieves the number of retries needed for the last transmission. Only retransmissions due to missing ACK frames are considered, retries due to CCA failures are not counted. | |||||||||||||||||||||
| NETOPT_BLE_CTX | (netdev_ble_ctx_t) set BLE radio context (channel, CRC, AA)
| |||||||||||||||||||||
| NETOPT_CHECKSUM | (netopt_enable_t) enable hardware checksumming If enabled, enable hardware checksumming of incoming frames. | |||||||||||||||||||||
| NETOPT_PHY_BUSY | (netopt_enable_t) enable busy mode When set, the PHY will enter busy mode, in which it will not accept incoming frames until unset. | |||||||||||||||||||||
| NETOPT_LORAWAN_APPEUI | (uint8_t*) LoRaWAN application EUI (8 bytes length) | |||||||||||||||||||||
| NETOPT_LORAWAN_JOINEUI | (uint8_t*) LoRaWAN join EUI (8 bytes length) | |||||||||||||||||||||
| NETOPT_LORAWAN_APPKEY | (uint8_t*) LoRaWAN application key (16 bytes length) | |||||||||||||||||||||
| NETOPT_LORAWAN_NWKKEY | (uint8_t*) LoRaWAN network key (16 bytes length) | |||||||||||||||||||||
| NETOPT_LORAWAN_NWKSKEY | (uint8_t*) LoRaWAN network session key (16 bytes length) | |||||||||||||||||||||
| NETOPT_LORAWAN_APPSKEY | (uint8_t*) LoRaWAN application session key (16 bytes length) | |||||||||||||||||||||
| NETOPT_LORAWAN_FNWKSINTKEY | (uint8_t*) LoRaWAN forwarding network session integrity key (16 bytes length) This key is only valid when using LoRaWAN 1.1x. | |||||||||||||||||||||
| NETOPT_LORAWAN_SNWKSINTKEY | (uint8_t*) LoRaWAN serving network session integrity key (16 bytes length) This key is only valid when using LoRaWAN 1.1x. | |||||||||||||||||||||
| NETOPT_LORAWAN_NWKSENCKEY | (uint8_t*) LoRaWAN network session encryption key buffer (16 bytes length) This key is only valid when using LoRaWAN 1.1x. | |||||||||||||||||||||
| NETOPT_LORAWAN_DEVICE_CLASS | (uint8_t) LoRaWAN device class (A, B, C)
| |||||||||||||||||||||
| NETOPT_LORAWAN_DR | (uint8_t) LoRaWAN datarate
| |||||||||||||||||||||
| NETOPT_LORAWAN_ADR | (netopt_enable_t) LoRaWAN adaptive datarate | |||||||||||||||||||||
| NETOPT_LORAWAN_PUBLIC_NETWORK | (netopt_enable_t) LoRaWAN public network | |||||||||||||||||||||
| NETOPT_LORAWAN_RX2_DR | (loramac_dr_idx_t) LoRaWAN datarate for second RX window
| |||||||||||||||||||||
| NETOPT_LORAWAN_RX2_FREQ | (uint32_t) LoRaWAN frequency used for second RX window | |||||||||||||||||||||
| NETOPT_LORAWAN_MAX_RX_ERROR | (uint32_t) LoRaWAN maximum system overall timing error (ms) | |||||||||||||||||||||
| NETOPT_LORAWAN_MIN_RX_SYMBOL | (uint8_t) LoRaWAN maximum system overall timing error (symbols) | |||||||||||||||||||||
| NETOPT_IEEE802154_PHY | (uint8_t) 802.15.4 PHY mode | |||||||||||||||||||||
| NETOPT_OQPSK_RATE | (uint8_t) legacy O-QPSK proprietary mode Allows to select higher data rates than standard 250 kbit/s Not compatible across vendors, only use with radios of the same type. | |||||||||||||||||||||
| NETOPT_MR_OQPSK_CHIPS | (uint8_t) MR-O-QPSK Chip Rate (kchip/s) | |||||||||||||||||||||
| NETOPT_MR_OQPSK_RATE | (uint8_t) MR-O-QPSK Rate Mode | |||||||||||||||||||||
| NETOPT_MR_OFDM_OPTION | (uint8_t) MR-OFDM PHY Option (Values: 1-4) | |||||||||||||||||||||
| NETOPT_MR_OFDM_MCS | (uint8_t) MR-OFDM PHY Modulation and Coding Scheme (Values: 0-6) | |||||||||||||||||||||
| NETOPT_MR_FSK_MODULATION_INDEX | (uint8_t) MR-FSK PHY Modulation Index (x 64) | |||||||||||||||||||||
| NETOPT_MR_FSK_MODULATION_ORDER | (uint8_t) MR-FSK Modulation Order | |||||||||||||||||||||
| NETOPT_MR_FSK_SRATE | (uint8_t) MR-FSK PHY Symbol Rate (kHz) | |||||||||||||||||||||
| NETOPT_MR_FSK_FEC | (uint8_t) MR-FSK PHY Forward Error Correction | |||||||||||||||||||||
| NETOPT_CHANNEL_SPACING | (uint8_t) PHY Channel Spacing (kHz) | |||||||||||||||||||||
| NETOPT_SYNCWORD | (uint8_t*) phy layer syncword | |||||||||||||||||||||
| NETOPT_RANDOM | (uint32_t) Get a random value from the device Nothing happens when set | |||||||||||||||||||||
| NETOPT_RX_SYMBOL_TIMEOUT | (uint16_t) Get or set the number of PHY symbols before assuming there's no data | |||||||||||||||||||||
| NETOPT_OTAA | (netopt_enable_t) Enable or disable OTAA activation (LoRaWAN) | |||||||||||||||||||||
| NETOPT_DEMOD_MARGIN | (uint8_t) Get the demodulation margin of the last Link Check request. | |||||||||||||||||||||
| NETOPT_NUM_GATEWAYS | (uint8_t) Get the number of gateways of the last Link Check request. | |||||||||||||||||||||
| NETOPT_LINK_CHECK | (netopt_enable_t) Perform a Link Check request (LoRaWAN) When set, the next transmission will request a Link Check and will be received on the next downlink | |||||||||||||||||||||
| NETOPT_RSSI | (int16_t) Received Signal Strength Indicator (RSSI) The RSSI is an indicator for the received field strength in wireless channels. It is often represented as the ratio of received power to a given unit, for example milliwatts. With a device-dependent scaling factor, the RSSI value can be expressed as power level in the unit dBm or ASU (Arbitrary Strength Unit). | |||||||||||||||||||||
| NETOPT_SCAN | (netopt_scan_request_t) Instruct the interface to do a network scan This netopt triggers an asynchronous network scan. The result is a list of reachable access points l2scan_list_t. Notification happens by a callback netopt_on_scan_result_t. | |||||||||||||||||||||
| NETOPT_CONNECT | (netopt_connect_request_t) Instructs the interface to connect to a network This netopt triggers an asynchronous connection attempt to a network. The result is a derivative of netopt_connect_result_t or netopt_disconnect_result_t. Notification happens through a callback netopt_on_connect_result_t or netopt_on_disconnect_result_t respectively. | |||||||||||||||||||||
| NETOPT_DISCONNECT | (netopt_disconnect_request_t) Instructs the interface to disconnect from a network This netopt triggers a disconnect procedure from a network. The result is a derivative of netopt_disconnect_result_t. Notification happens through a callback netopt_on_disconnect_result_t. | |||||||||||||||||||||
| NETOPT_BATMON | (uint16_t) Set the battery monitor voltage (in mV). When set, a SYS_BUS_POWER_EVENT_LOW_VOLTAGE event is generated on the SYS_BUS_POWER bus if the supply voltage falls below the set value. Set to 0 to disable battery monitoring. | |||||||||||||||||||||
| NETOPT_L2_GROUP | (array of byte array) get link layer multicast groups as array of byte arrays (length of each byte array corresponds to the length of NETOPT_ADDRESS) or join a link layer multicast group as byte array on an interface When getting the option you can pass an array of byte arrays of any length greater than 0 to the getter. The array will be filled up to to its maximum and the remaining addresses on the interface will be ignored | |||||||||||||||||||||
| NETOPT_L2_GROUP_LEAVE | (array of byte arrays) Leave an link layer multicast group | |||||||||||||||||||||
| NETOPT_PAN_COORD | (netopt_enable_t) Set/Get PAN coordinator role | |||||||||||||||||||||
| NETOPT_GTS_ALLOC | (ieee802154_dsme_alloc_t) Allocate DSME GTS slot | |||||||||||||||||||||
| NETOPT_GTS_TX | (netopt_enable_t) Transmit frames using GTS transmission When set, frames are sent using a Guaranteed Time Slot (GTS). Otherwise with CSMA/CA. | |||||||||||||||||||||
| NETOPT_NUMOF | maximum number of options defined here.
| |||||||||||||||||||||
| const char * netopt2str | ( | netopt_t | opt | ) |
Get a string ptr corresponding to opt, for debugging.
| [in] | opt | The option to get a string representation for |
1.9.8