periph_conf.h File Reference

Peripheral MCU configuration for the nucleo-l432kc board. More...

Detailed Description

Peripheral MCU configuration for the nucleo-l432kc board.

Author

Alexandre Abadie alexa.nosp@m.ndre.nosp@m..abad.nosp@m.ie@i.nosp@m.nria..nosp@m.fr

Vincent Dupont vince.nosp@m.nt@o.nosp@m.takey.nosp@m.s.co.nosp@m.m

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "clk_conf.h"
#include "cfg_i2c1_pb6_pb7.h"
#include "cfg_rtt_default.h"
#include "cfg_timer_tim2_tim15_tim16.h"

Include dependency graph for periph_conf.h:

Go to the source code of this file.

#define	CONFIG_BOARD_HAS_LSE   1

UART configuration
#define	UART_0_ISR   (isr_usart2)
#define	UART_1_ISR   (isr_usart1)
#define	UART_NUMOF   ARRAY_SIZE(uart_config)
static const uart_conf_t	uart_config []

PWM configuration
#define	PWM_NUMOF   ARRAY_SIZE(pwm_config)
static const pwm_conf_t	pwm_config []

SPI configuration
#define	SPI_NUMOF   ARRAY_SIZE(spi_config)
static const spi_conf_t	spi_config []
#define	ADC_NUMOF   ARRAY_SIZE(adc_config)
	Number of ADC devices.
static const adc_conf_t	adc_config []
	ADC configuration.

Macro Definition Documentation

ADC_NUMOF

#define ADC_NUMOF   ARRAY_SIZE(adc_config)

Number of ADC devices.

Definition at line 149 of file periph_conf.h.

CONFIG_BOARD_HAS_LSE

#define CONFIG_BOARD_HAS_LSE   1

Definition at line 22 of file periph_conf.h.

PWM_NUMOF

#define PWM_NUMOF   ARRAY_SIZE(pwm_config)

Definition at line 89 of file periph_conf.h.

SPI_NUMOF

#define SPI_NUMOF   ARRAY_SIZE(spi_config)

Definition at line 112 of file periph_conf.h.

UART_0_ISR

#define UART_0_ISR   (isr_usart2)

Definition at line 66 of file periph_conf.h.

UART_1_ISR

#define UART_1_ISR   (isr_usart1)

Definition at line 67 of file periph_conf.h.

UART_NUMOF

#define UART_NUMOF   ARRAY_SIZE(uart_config)

Definition at line 69 of file periph_conf.h.

Variable Documentation

adc_config

const adc_conf_t adc_config[]

static

Initial value:

= {
    {GPIO_PIN(PORT_A, 0),  .dev = 0, .chan = 5},  
    {GPIO_PIN(PORT_A, 1),  .dev = 0, .chan = 6},  
    {GPIO_PIN(PORT_A, 3),  .dev = 0, .chan = 8},  
    {GPIO_PIN(PORT_A, 4),  .dev = 0, .chan = 9},  
    {GPIO_PIN(PORT_A, 7),  .dev = 0, .chan = 12}, 
}

ADC configuration.

Note that we do not configure all ADC channels, and not in the STM32L432KC order. Instead, we just define 5 ADC channels, for the Nucleo Arduino Nano header pins A0-A3 and A6 - all which are enabled by default and without collision with other features, for example, I2C or VCP_TX.

To find appropriate device and channel find in the board manual, table showing pin assignments and information about ADC - a text similar to ADC[X]_IN[Y], where: [X] - describes used device - indexed from 0, for example ADC1_IN10 is device 0, [Y] - describes used channel - indexed from 1, for example ADC1_IN10 is channel 10

For Nucleo-L432KC this information is in board manual, Table 16 or STM32L432KC MCU datasheet - Table 14.

Definition at line 138 of file periph_conf.h.

pwm_config

const pwm_conf_t pwm_config[]

static

Initial value:

= {
    {
        .dev      = TIM1,
        .rcc_mask = RCC_APB2ENR_TIM1EN,
        .chan     = { { .pin = GPIO_PIN(PORT_A, 8) , .cc_chan = 0 },
                      { .pin = GPIO_UNDEF,                   .cc_chan = 0 },
                      { .pin = GPIO_UNDEF,                   .cc_chan = 0 },
                      { .pin = GPIO_UNDEF,                   .cc_chan = 0 } },
        .af       = GPIO_AF1,
        .bus      = APB2
    }
}

Definition at line 76 of file periph_conf.h.

spi_config

const spi_conf_t spi_config[]

static

Initial value:

= {
    {
        .dev      = SPI1,
        .mosi_pin = GPIO_PIN(PORT_B, 5),
        .miso_pin = GPIO_PIN(PORT_B, 4),
        .sclk_pin = GPIO_PIN(PORT_B, 3),
        .cs_pin   = SPI_CS_UNDEF,
        .mosi_af  = GPIO_AF5,
        .miso_af  = GPIO_AF5,
        .sclk_af  = GPIO_AF5,
        .cs_af    = GPIO_AF5,
        .rccmask  = RCC_APB2ENR_SPI1EN,
        .apbbus   = APB2
    }
}

Definition at line 96 of file periph_conf.h.

uart_config

const uart_conf_t uart_config[]

static

Initial value:

= {
    {
        .dev        = USART2,
        .rcc_mask   = RCC_APB1ENR1_USART2EN,
        .rx_pin     = GPIO_PIN(PORT_A, 15),
        .tx_pin     = GPIO_PIN(PORT_A, 2),
        .rx_af      = GPIO_AF3,
        .tx_af      = GPIO_AF7,
        .bus        = APB1,
        .irqn       = USART2_IRQn,
        .type       = STM32_USART,
        .clk_src    = 0, 
    },
    {
        .dev        = USART1,
        .rcc_mask   = RCC_APB2ENR_USART1EN,
        .rx_pin     = GPIO_PIN(PORT_A, 10),
        .tx_pin     = GPIO_PIN(PORT_A, 9),
        .rx_af      = GPIO_AF7,
        .tx_af      = GPIO_AF7,
        .bus        = APB2,
        .irqn       = USART1_IRQn,
        .type       = STM32_USART,
        .clk_src    = 0, 
    },
}

Definition at line 39 of file periph_conf.h.