cc26x0_cc13x0_prcm.h

Go to the documentation of this file.

/*
 * SPDX-FileCopyrightText: 2016 Leon George
 * SPDX-License-Identifier: LGPL-2.1-only
 */
 
#pragma once

 
#include <cc26xx_cc13xx.h>
 
#ifdef __cplusplus
extern "C" {
#endif

typedef struct {
    reg32_t CTL0; 
    reg32_t CTL1; 
    reg32_t RADCEXTCFG; 
    reg32_t AMPCOMPCTL; 
    reg32_t AMPCOMPTH1; 
    reg32_t AMPCOMPTH2; 
    reg32_t ANABYPASSVAL1; 
    reg32_t ANABYPASSVAL2; 
    reg32_t ATESTCTL; 
    reg32_t ADCDOUBLERNANOAMPCTL; 
    reg32_t XOSCHFCTL; 
    reg32_t LFOSCCTL; 
    reg32_t RCOSCHFCTL; 
    reg32_t STAT0; 
    reg32_t STAT1; 
    reg32_t STAT2; 
} ddi0_osc_regs_t;

#define DDI_0_OSC_CTL0_SCLK_LF_SRC_SEL_mask         0x6
#define DDI_0_OSC_CTL0_SCLK_LF_SRC_SEL_HF_RCOSC     0x0
#define DDI_0_OSC_CTL0_SCLK_LF_SRC_SEL_HF_XOSC      0x4
#define DDI_0_OSC_CTL0_SCLK_LF_SRC_SEL_LF_RCOSC     0x8
#define DDI_0_OSC_CTL0_SCLK_LF_SRC_SEL_LF_XOSC      0xC
#define DDI_0_OSC_CTL0_ACLK_REF_SRC_SEL_RCOSC_mask  0x60
#define DDI_0_OSC_CTL0_ACLK_REF_SRC_SEL_RCOSC_HF    0x00 /* 31.25kHz */
#define DDI_0_OSC_CTL0_ACLK_REF_SRC_SEL_XOSC_HF     0x20 /* 31.25kHz */
#define DDI_0_OSC_CTL0_ACLK_REF_SRC_SEL_RCOSC_LF    0x40 /* 32kHz */
#define DDI_0_OSC_CTL0_ACLK_REF_SRC_SEL_XOSC_LF     0x60 /* 32.768kHz */
#define DDI_0_OSC_CTL0_ACLK_TDC_SRC_SEL_RCOSC_mask  0x180
#define DDI_0_OSC_CTL0_ACLK_TDC_SRC_SEL_RCOSC_HF    0x000 /* 48MHz */
#define DDI_0_OSC_CTL0_ACLK_TDC_SRC_SEL_RCOSC_LF    0x080 /* 48MHz */
#define DDI_0_OSC_CTL0_ACLK_TDC_SRC_SEL_XOSC_HF     0x100 /* 24MHz */
#define DDI_0_OSC_CTL0_DOUBLER_START_DURATION_mask  0x6000000
#define DDI_0_OSC_CTL0_BYPASS_RCOSC_LF_CLK_QUAL     0x10000000
#define DDI_0_OSC_CTL0_BYPASS_XOSC_LF_CLK_QUAL      0x20000000
#define DDI_0_OSC_CTL0_XTAL_IS_24M                  0x80000000

#define DDI0_OSC_BASE       0x400CA000 

#define DDI_0_OSC ((ddi0_osc_regs_t *) (DDI0_OSC_BASE))

typedef struct {
    reg32_t PWRCTL; 
    reg32_t RESETCTL; 
    reg32_t SLEEPCTL; 
} aon_sysctl_regs_t;

#define AON_SYSCTL_BASE       0x40090000 
 
#define AON_SYSCTL ((aon_sysctl_regs_t *) (AON_SYSCTL_BASE)) 

typedef struct {
    reg32_t MCUCLK; 
    reg32_t AUXCLK; 
    reg32_t MCUCFG; 
    reg32_t AUXCFG; 
    reg32_t AUXCTL; 
    reg32_t PWRSTAT; 
    reg32_t __reserved1; 
    reg32_t SHUTDOWN; 
    reg32_t CTL0; 
    reg32_t CTL1; 
    reg32_t __reserved2[2]; 
    reg32_t RECHARGECFG; 
    reg32_t RECHARGESTAT; 
    reg32_t __reserved3; 
    reg32_t OSCCFG; 
    reg32_t JTAGCFG; 
    reg32_t JTAGUSERCODE; 
} aon_wuc_regs_t;

#define MCUCLK_PWR_DWN_SRC          0x1 /* SCLK_LF in powerdown (no clock elsewise) */
#define MCUCLK_PWR_DWN_SRC_mask     0x3
#define MCUCLK_RCOSC_HF_CAL_DONE    0x4 /* set by MCU bootcode. RCOSC_HF is calibrated to 48 MHz, allowing FLASH to power up */
 
#define AUXCLK_SRC_HF               0x1 /* SCLK for AUX */
#define AUXCLK_SRC_LF               0x4
#define AUXCLK_SRC_mask             0x7 /* guaranteed to be glitchless */
#define AUXCLK_SCLK_HF_DIV_pos      8 /* don't set while SCLK_HF active for AUX */
#define AUXCLK_SCLK_HF_DIV_mask     0x700 /* divisor will be 2^(value+1) */
#define AUXCLK_PWR_DWN_SRC_pos      11 /* SCLK_LF in powerdown when SCLK_HF is source (no clock elsewise?!)  */
#define AUXCLK_PWR_DWN_SRC_mask     0x1800 /* datasheet is confusing.. */
 
#define MCUCFG_SRAM_RET_OFF         0x0 /* no retention for any SRAM-bank */
#define MCUCFG_SRAM_RET_B0          0x1
#define MCUCFG_SRAM_RET_B01         0x3
#define MCUCFG_SRAM_RET_B012        0x7
#define MCUCFG_SRAM_RET_B0124       0xF /* retention for banks 0, 1, 2, and 3 */
#define MCUCFG_SRAM_FIXED_WU_EN     0x100
#define MCUCFG_SRAM_VIRT_OFF        0x200
 
#define AUXCFG_RAM_RET_EN           0x1 /* retention for AUX_RAM bank 0. is off when otherwise in retention mode */
 
#define AUXCTL_AUX_FORCE_ON     0x1
#define AUXCTL_SWEV             0x2
#define AUXCTL_SCE_RUN_EN       0x3
#define AUXCTL_RESET_REQ        0x80000000
 
#define PWRSTAT_AUX_RESET_DONE      0x2
#define PWRSTAT_AUX_BUS_CONNECTED   0x4
#define PWRSTAT_MCU_PD_ON           0x10
#define PWRSTAT_AUX_PD_ON           0x20
#define PWRSTAT_JTAG_PD_ON          0x40
#define PWRSTAT_AUX_PWR_DNW         0x200
 
#define SHUTDOWN_EN     0x1 /* register/cancel shutdown request */
 
#define AONWUC_CTL0_MCU_SRAM_ERASE      0x4
#define AONWUC_CTL0_AUX_SRAM_ERASE      0x8
#define AONWUC_CTL0_PWR_DWN_DIS         0x10 /* disable powerdown on request */
 
#define AONWUC_CTL1_MCU_WARM_RESET      0x1 /* last MCU reset was a warm reset */
#define AONWUC_CTL1_MCU_RESET_SRC       0x2 /* JTAG was source of last reset (MCU SW elsewise) */
 
#define RECHARGECFG_PER_E_mask          0x00000007 /* number of 32KHz clocks between activation of recharge controller: */
#define RECHARGECFG_PER_M_mask          0x000000F8 /* computed as follows: PERIOD = (PER_M*16+15) * 2^(PER_E) */
#define RECHARGECFG_MAX_PER_E_mask      0x00000700 /* maximum period the recharge algorithm can take */
#define RECHARGECFG_MAX_PER_M_mask      0x0000F800 /* computed as follows: MAXCYCLES = (MAX_PER_M*16+15) * 2^(MAX_PER_E) */
#define RECHARGECFG_C1_mask             0x000F0000 /* i resign */
#define RECHARGECFG_C2_mask             0x000F0000
#define RECHARGECFG_ADAPTIVE_EN         0x80000000
 
#define RECHARGESTAT_MAX_USED_PER_mask  0x0FFFF
#define RECHARGESTAT_VDDR_SMPLS_mask    0xF0000
 
#define OSCCFG_PER_E_mask               0x07 /* number of 32KHz clocks between oscillator amplitude calibrations */
#define OSCCFG_PER_M_mask               0xF8 /* computed as follows: PERIOD = (PER_M*16+15) * 2^(PER_E) */
 
#define JTAGCFG_JTAG_PD_FORCE_ON        0x10

#define AON_WUC_BASE       0x40091000 
 
#define AON_WUC ((aon_wuc_regs_t *) (AON_WUC_BASE)) 

typedef struct {
    reg32_t CTL; 
    reg32_t EVFLAGS; 
    reg32_t SEC; 
    reg32_t SUBSEC; 
    reg32_t SUBSECINC; 
    reg32_t CHCTL; 
    reg32_t CH0CMP; 
    reg32_t CH1CMP; 
    reg32_t CH2CMP; 
    reg32_t CH2CMPINC; 
    reg32_t CH1CAPT; 
    reg32_t SYNC; 
} aon_rtc_regs_t;

#define AON_RTC_CTL_RTC_UPD_EN 0x00000002

#define AON_RTC_BASE (PERIPH_BASE + 0x92000) 
 
#define AON_RTC ((aon_rtc_regs_t *) (AON_RTC_BASE)) 

typedef struct {
    reg32_t INFRCLKDIVR; 
    reg32_t INFRCLKDIVS; 
    reg32_t INFRCLKDIVDS; 
    reg32_t VDCTL; 
    reg32_t __reserved1[6]; 
    reg32_t CLKLOADCTL; 
    reg32_t RFCCLKG; 
    reg32_t VIMSCLKG; 
    reg32_t __reserved2[2]; 
    reg32_t SECDMACLKGR; 
    reg32_t SECDMACLKGS; 
    reg32_t SECDMACLKGDS; 
    reg32_t GPIOCLKGR; 
    reg32_t GPIOCLKGS; 
    reg32_t GPIOCLKGDS; 
    reg32_t GPTCLKGR; 
    reg32_t GPTCLKGS; 
    reg32_t GPTCLKGDS; 
    reg32_t I2CCLKGR; 
    reg32_t I2CCLKGS; 
    reg32_t I2CCLKGDS; 
    reg32_t UARTCLKGR; 
    reg32_t UARTCLKGS; 
    reg32_t UARTCLKGDS; 
    reg32_t SSICLKGR; 
    reg32_t SSICLKGS; 
    reg32_t SSICLKGDS; 
    reg32_t I2SCLKGR; 
    reg32_t I2SCLKGS; 
    reg32_t I2SCLKGDS; 
    reg32_t __reserved3[10]; 
    reg32_t CPUCLKDIV; 
    reg32_t __reserved4[3]; 
    reg32_t I2SBCLKSEL; 
    reg32_t GPTCLKDIV; 
    reg32_t I2SCLKCTL; 
    reg32_t I2SMCLKDIV; 
    reg32_t I2SBCLKDIV; 
    reg32_t I2SWCLKDIV; 
    reg32_t __reserved5[11]; 
    reg32_t SWRESET; 
    reg32_t WARMRESET; 
    reg32_t __reserved6[6]; 
    reg32_t PDCTL0; 
    reg32_t PDCTL0RFC; 
    reg32_t PDCTL0SERIAL; 
    reg32_t PDCTL0PERIPH; 
    reg32_t __reserved7; 
    reg32_t PDSTAT0; 
    reg32_t PDSTAT0RFC; 
    reg32_t PDSTAT0SERIAL; 
    reg32_t PDSTAT0PERIPH; 
    reg32_t __reserved8[11]; 
    reg32_t PDCTL1; 
    reg32_t __reserved9; 
    reg32_t PDCTL1CPU; 
    reg32_t PDCTL1RFC; 
    reg32_t PDCTL1VIMS; 
    reg32_t __reserved10; 
    reg32_t PDSTAT1; 
    reg32_t PDSTAT1BUS; 
    reg32_t PDSTAT1RFC; 
    reg32_t PDSTAT1CPU; 
    reg32_t PDSTAT1VIMS; 
    reg32_t __reserved11[10]; 
    reg32_t RFCMODESEL; 
    reg32_t __reserved12[20]; 
    reg32_t RAMRETEN; 
    reg32_t __reserved13; 
    reg32_t PDRETEN; 
    reg32_t __reserved14[8]; 
    reg32_t RAMHWOPT; 
} prcm_regs_t;

#define CLKLOADCTL_LOAD        0x1
#define CLKLOADCTL_LOADDONE    0x2
 
#define PDCTL0_RFC_ON       0x1
#define PDCTL0_SERIAL_ON    0x2
#define PDCTL0_PERIPH_ON    0x4
 
#define PDSTAT0_RFC_ON       0x1
#define PDSTAT0_SERIAL_ON    0x2
#define PDSTAT0_PERIPH_ON    0x4
 
#define PDCTL1_CPU_ON       0x2
#define PDCTL1_RFC_ON       0x4
#define PDCTL1_VIMS_ON      0x8
 
#define PDSTAT1_CPU_ON      0x2
#define PDSTAT1_RFC_ON      0x4
#define PDSTAT1_VIMS_ON     0x8
 
#define GPIOCLKGR_CLK_EN       0x1
#define I2CCLKGR_CLK_EN        0x1
#define UARTCLKGR_CLK_EN_UART0 0x1
 
#define GPIOCLKGS_CLK_EN       0x1
#define I2CCLKGS_CLK_EN        0x1
#define UARTCLKGS_CLK_EN_UART0 0x1
 
#define GPIOCLKGDS_CLK_EN       0x1
#define I2CCLKGDS_CLK_EN        0x1
#define UARTCLKGDS_CLK_EN_UART0 0x1

#define PRCM_BASE        (PERIPH_BASE + 0x82000) 
#define PRCM_BASE_NONBUF (PERIPH_BASE_NONBUF + 0x82000) 
 
#define PRCM        ((prcm_regs_t *) (PRCM_BASE)) 
#define PRCM_NONBUF ((prcm_regs_t *) (PRCM_BASE_NONBUF)) 
 
#ifdef __cplusplus
} /* end extern "C" */
#endif