Default configuration for the QST QMA6100P accelerometer. More...

Detailed Description

Default configuration for the QST QMA6100P accelerometer.

Author: Baptiste Le Duc bapti.nosp@m.ste..nosp@m.leduc.nosp@m.@eti.nosp@m.k.com; Léandre Le Duc leand.nosp@m.re.l.nosp@m.educ3.nosp@m.8@gm.nosp@m.ail.c.nosp@m.om

#include "board.h"
#include "periph/gpio.h"
#include "periph/i2c.h"
#include "qma6100p.h"
#include "saul_reg.h"

Include dependency graph for qma6100p_params.h:

Go to the source code of this file.

Macros
#define	QMA6100P_PARAM_I2C (I2C_DEV(0))
	Default I2C bus.

#define	CONFIG_QMA6100P_I2C_ADDR (QMA6100P_I2C_ADDR_LOW)
	Default I2C address (fallback when not configured via Kconfig)

#define	QMA6100P_PARAM_I2C_ADDR (CONFIG_QMA6100P_I2C_ADDR)
	Default I2C address.

#define	QMA6100P_PARAM_RATE (QMA6100P_ODR_100HZ)
	Default output data rate.

#define	QMA6100P_PARAM_RANGE (QMA6100P_RANGE_2G)
	Default full-scale range.

#define	QMA6100P_PARAM_MCLK (QMA6100P_PM_MCLK_51K2)
	Default master clock frequency.

#define	QMA6100P_PARAM_INT1_PIN (GPIO_UNDEF)
	MCU GPIO connected to the QMA6100P INT1 pin.

#define	QMA6100P_PARAM_INT2_PIN (GPIO_UNDEF)
	MCU GPIO connected to the QMA6100P INT2 pin.

#define	QMA6100P_PARAM_INT_ACTIVE_LEVEL (QMA6100P_INTPIN_ACTIVE_HIGH)
	Default interrupt pin active level.

#define	QMA6100P_PARAM_INT_PIN_MODE (QMA6100P_INTPIN_PUSH_PULL)
	Default interrupt pin output mode (push-pull or open-drain)

#define	QMA6100P_PARAM_INT_SHADOW (QMA6100P_INT_CFG_SHADOW_DIS)
	Default shadow mode for acceleration data registers.

#define	QMA6100P_PARAMS
	Default configuration parameters structure for QMA6100P devices.

#define	QMA6100P_SAUL_INFO { .name = "qma6100p" }
	Additional SAUL registry information.

Variables
static const qma6100p_params_t	qma6100p_params []
	QMA6100P defaults params if not defined for a board or application.

static const saul_reg_info_t	qma6100p_saul_info []
	Additional meta information to keep in the SAUL registry.

QMA6100P I2C addresses
Determined by the AD0 pin level.
#define	QMA6100P_I2C_ADDR_LOW (0x12)
	AD0 connected to GND.

#define	QMA6100P_I2C_ADDR_HIGH (0x13)
	AD0 connected to VDD.

Macro Definition Documentation

◆ CONFIG_QMA6100P_I2C_ADDR

#define CONFIG_QMA6100P_I2C_ADDR (QMA6100P_I2C_ADDR_LOW)

Default I2C address (fallback when not configured via Kconfig)

Definition at line 51 of file qma6100p_params.h.

◆ QMA6100P_I2C_ADDR_HIGH

#define QMA6100P_I2C_ADDR_HIGH (0x13)

AD0 connected to VDD.

Definition at line 41 of file qma6100p_params.h.

◆ QMA6100P_I2C_ADDR_LOW

#define QMA6100P_I2C_ADDR_LOW (0x12)

AD0 connected to GND.

Definition at line 40 of file qma6100p_params.h.

◆ QMA6100P_PARAM_I2C

#define QMA6100P_PARAM_I2C (I2C_DEV(0))

Default I2C bus.

Definition at line 46 of file qma6100p_params.h.

◆ QMA6100P_PARAM_I2C_ADDR

#define QMA6100P_PARAM_I2C_ADDR (CONFIG_QMA6100P_I2C_ADDR)

Default I2C address.

Definition at line 56 of file qma6100p_params.h.

◆ QMA6100P_PARAM_INT1_PIN

#define QMA6100P_PARAM_INT1_PIN (GPIO_UNDEF)

MCU GPIO connected to the QMA6100P INT1 pin.

Set to GPIO_UNDEF to disable interrupt-driven operation on this line and use polling instead.

Definition at line 116 of file qma6100p_params.h.

◆ QMA6100P_PARAM_INT2_PIN

#define QMA6100P_PARAM_INT2_PIN (GPIO_UNDEF)

MCU GPIO connected to the QMA6100P INT2 pin.

Set to GPIO_UNDEF to disable interrupt-driven operation on this line and use polling instead.

Definition at line 124 of file qma6100p_params.h.

◆ QMA6100P_PARAM_INT_ACTIVE_LEVEL

#define QMA6100P_PARAM_INT_ACTIVE_LEVEL (QMA6100P_INTPIN_ACTIVE_HIGH)

Default interrupt pin active level.

Definition at line 134 of file qma6100p_params.h.

◆ QMA6100P_PARAM_INT_PIN_MODE

#define QMA6100P_PARAM_INT_PIN_MODE (QMA6100P_INTPIN_PUSH_PULL)

Default interrupt pin output mode (push-pull or open-drain)

Definition at line 144 of file qma6100p_params.h.

◆ QMA6100P_PARAM_INT_SHADOW

#define QMA6100P_PARAM_INT_SHADOW (QMA6100P_INT_CFG_SHADOW_DIS)

Default shadow mode for acceleration data registers.

Definition at line 154 of file qma6100p_params.h.

◆ QMA6100P_PARAM_MCLK

#define QMA6100P_PARAM_MCLK (QMA6100P_PM_MCLK_51K2)

Default master clock frequency.

Definition at line 108 of file qma6100p_params.h.

◆ QMA6100P_PARAM_RANGE

#define QMA6100P_PARAM_RANGE (QMA6100P_RANGE_2G)

Default full-scale range.

Definition at line 94 of file qma6100p_params.h.

◆ QMA6100P_PARAM_RATE

#define QMA6100P_PARAM_RATE (QMA6100P_ODR_100HZ)

Default output data rate.

Definition at line 78 of file qma6100p_params.h.

◆ QMA6100P_PARAMS

#define QMA6100P_PARAMS

Value:

                            { .i2c = QMA6100P_PARAM_I2C,           \
                            .addr = QMA6100P_PARAM_I2C_ADDR,     \
                            .int1_pin = QMA6100P_PARAM_INT1_PIN, \
                            .int2_pin = QMA6100P_PARAM_INT2_PIN, \
                            .rate = QMA6100P_PARAM_RATE,         \
                            .range = QMA6100P_PARAM_RANGE,       \
                            .mclk = QMA6100P_PARAM_MCLK,         \
                            .interrupt_shadow = QMA6100P_PARAM_INT_SHADOW }

Default configuration parameters structure for QMA6100P devices.

Definition at line 159 of file qma6100p_params.h.

◆ QMA6100P_SAUL_INFO

#define QMA6100P_SAUL_INFO { .name = "qma6100p" }

Additional SAUL registry information.

Definition at line 171 of file qma6100p_params.h.

Variable Documentation

◆ qma6100p_params

const qma6100p_params_t qma6100p_params[]

static

Initial value:

= {
    QMA6100P_PARAMS
}

QMA6100P defaults params if not defined for a board or application.

Definition at line 178 of file qma6100p_params.h.

◆ qma6100p_saul_info

const saul_reg_info_t qma6100p_saul_info[]