periph_conf.h

Go to the documentation of this file.

/*
 * SPDX-FileCopyrightText: 2016 Fundacion Inria Chile
 * SPDX-License-Identifier: LGPL-2.1-only
 */
 
#pragma once

 
#include "periph_cpu.h"
#include "clk_conf.h"
#include "cfg_timer_tim5.h"
 
#ifdef __cplusplus
extern "C" {
#endif

static const uart_conf_t uart_config[] = {
    {
        .dev      = USART3,
        .rcc_mask = RCC_APB1ENR_USART3EN,
        .rx_pin   = GPIO_PIN(PORT_B, 11),
        .tx_pin   = GPIO_PIN(PORT_B, 10),
        .rx_af    = GPIO_AF7,
        .tx_af    = GPIO_AF7,
        .bus      = APB1,
        .irqn     = USART3_IRQn
    },
    {
        .dev      = USART2,
        .rcc_mask = RCC_APB1ENR_USART2EN,
        .rx_pin   = GPIO_PIN(PORT_A, 3),
        .tx_pin   = GPIO_PIN(PORT_A, 2),
        .rx_af    = GPIO_AF7,
        .tx_af    = GPIO_AF7,
        .bus      = APB1,
        .irqn     = USART2_IRQn
    },
    {
        .dev      = USART1,
        .rcc_mask = RCC_APB2ENR_USART1EN,
        .rx_pin   = GPIO_PIN(PORT_A, 10),
        .tx_pin   = GPIO_PIN(PORT_A, 9),
        .rx_af    = GPIO_AF7,
        .tx_af    = GPIO_AF7,
        .bus      = APB2,
        .irqn     = USART1_IRQn
    }
};
 
#define UART_0_ISR          (isr_usart3)
#define UART_1_ISR          (isr_usart2)
#define UART_2_ISR          (isr_usart1)
 
#define UART_NUMOF          ARRAY_SIZE(uart_config)

static const pwm_conf_t pwm_config[] = {
    {
        .dev      = TIM3,
        .rcc_mask = RCC_APB1ENR_TIM3EN,
        .chan     = { { .pin = GPIO_PIN(PORT_C, 6), .cc_chan = 0 },
                      { .pin = GPIO_PIN(PORT_C, 7), .cc_chan = 1 },
                      { .pin = GPIO_PIN(PORT_C, 8), .cc_chan = 2 },
                      { .pin = GPIO_PIN(PORT_C, 9), .cc_chan = 3 } },
        .af       = GPIO_AF2,
        .bus      = APB1
    }
};
 
#define PWM_NUMOF           ARRAY_SIZE(pwm_config)

static const spi_conf_t spi_config[] = {
    {
        .dev      = SPI1,
        .mosi_pin = GPIO_PIN(PORT_B, 5),
        .miso_pin = GPIO_PIN(PORT_B, 4),
        .sclk_pin = GPIO_PIN(PORT_B, 3),
        .cs_pin   = SPI_CS_UNDEF,
        .mosi_af  = GPIO_AF5,
        .miso_af  = GPIO_AF5,
        .sclk_af  = GPIO_AF5,
        .cs_af    = GPIO_AF5,
        .rccmask  = RCC_APB2ENR_SPI1EN,
        .apbbus   = APB2
    },
    {
        .dev      = SPI2,
        .mosi_pin = GPIO_PIN(PORT_B, 15),
        .miso_pin = GPIO_PIN(PORT_B, 14),
        .sclk_pin = GPIO_PIN(PORT_B, 13),
        .cs_pin   = SPI_CS_UNDEF,
        .mosi_af  = GPIO_AF5,
        .miso_af  = GPIO_AF5,
        .sclk_af  = GPIO_AF5,
        .cs_af    = GPIO_AF5,
        .rccmask  = RCC_APB1ENR_SPI2EN,
        .apbbus   = APB1
    },
    {
        .dev      = SPI3,
        .mosi_pin = GPIO_PIN(PORT_C, 12),
        .miso_pin = GPIO_PIN(PORT_C, 11),
        .sclk_pin = GPIO_PIN(PORT_C, 10),
        .cs_pin   = SPI_CS_UNDEF,
        .mosi_af  = GPIO_AF6,
        .miso_af  = GPIO_AF6,
        .sclk_af  = GPIO_AF6,
        .cs_af    = GPIO_AF6,
        .rccmask  = RCC_APB1ENR_SPI3EN,
        .apbbus   = APB1
    }
};
 
#define SPI_NUMOF           ARRAY_SIZE(spi_config)

static const i2c_conf_t i2c_config[] = {
    {
        .dev            = I2C1,
        .speed          = I2C_SPEED_NORMAL,
        .scl_pin        = GPIO_PIN(PORT_B, 8),
        .sda_pin        = GPIO_PIN(PORT_B, 9),
        .scl_af         = GPIO_AF4,
        .sda_af         = GPIO_AF4,
        .bus            = APB1,
        .rcc_mask       = RCC_APB1ENR_I2C1EN,
        .clk            = CLOCK_APB1,
        .irqn           = I2C1_EV_IRQn
    }
};
 
#define I2C_0_ISR           isr_i2c1_ev
 
#define I2C_NUMOF           ARRAY_SIZE(i2c_config)

static const adc_conf_t adc_config[] = {
    { GPIO_PIN(PORT_C, 0), 10 },
    { GPIO_PIN(PORT_C, 1), 11 },
    { GPIO_PIN(PORT_C, 2), 12 },
    /* ADC Temperature channel */
    { GPIO_UNDEF,          16 },
    /* ADC VREF channel */
    { GPIO_UNDEF,          17 },
};
 
#define ADC_NUMOF           ARRAY_SIZE(adc_config)

static const dac_conf_t dac_config[] = {
    { .pin = GPIO_PIN(PORT_A,  4), .chan = 0 },
    { .pin = GPIO_PIN(PORT_A,  5), .chan = 1 }
};
 
#define DAC_NUMOF           ARRAY_SIZE(dac_config)
 
#ifdef __cplusplus
}
#endif