periph_conf.h File Reference

Peripheral configuration for the nRF9160DK. More...

Detailed Description

Peripheral configuration for the nRF9160DK.

Author
Dylan Laduranty dylan.nosp@m..lad.nosp@m.urant.nosp@m.y@me.nosp@m.sotic.nosp@m..com

Definition in file periph_conf.h.

#include "periph_cpu.h"
#include "board.h"
+ Include dependency graph for periph_conf.h:

Go to the source code of this file.

I2C configuration

#define I2C_NUMOF   ARRAY_SIZE(i2c_config)
 
static const i2c_conf_t i2c_config []
 

SPI configuration

#define SPI_NUMOF   ARRAY_SIZE(spi_config)
 
static const spi_conf_t spi_config []
 

Timer configuration

#define TIMER_0_ISR   isr_timer0
 Timer0 IRQ.
 
#define TIMER_1_ISR   isr_timer1
 Timer1 IRQ.
 
#define TIMER_NUMOF   ARRAY_SIZE(timer_config)
 Timer configuration NUMOF.
 
static const timer_conf_t timer_config []
 

UART configuration

#define UART_0_ISR   (isr_uarte0_spim0_spis0_twim0_twis0)
 UART0_IRQ.
 
#define UART_1_ISR   (isr_uarte1_spim1_spis1_twim1_twis1)
 UART1_IRQ.
 
#define UART_NUMOF   ARRAY_SIZE(uart_config)
 UART confgiguration NUMOF.
 
static const uart_conf_t uart_config []
 

Variable Documentation

◆ i2c_config

const i2c_conf_t i2c_config[]
static
Initial value:
= {
{
.dev = NRF_TWIM3_S,
.scl = GPIO_PIN(0, 31),
.sda = GPIO_PIN(0, 30),
}
}
#define GPIO_PIN(x, y)
Define a CPU specific GPIO pin generator macro.
Definition: periph_cpu.h:35
@ I2C_SPEED_NORMAL
normal mode: ~100 kbit/s
Definition: periph_cpu.h:274

Definition at line 35 of file periph_conf.h.

◆ spi_config

const spi_conf_t spi_config[]
static
Initial value:
= {
{
.dev = NRF_SPIM2_S,
.sclk = GPIO_PIN(0, 13),
.mosi = GPIO_PIN(0, 11),
.miso = GPIO_PIN(0, 12),
}
}

Definition at line 50 of file periph_conf.h.

◆ timer_config

const timer_conf_t timer_config[]
static
Initial value:
= {
{
.dev = NRF_TIMER0_S,
.channels = 3,
.bitmode = TIMER_BITMODE_BITMODE_32Bit,
.irqn = TIMER0_IRQn
},
{
.dev = NRF_TIMER1_S,
.channels = 3,
.bitmode = TIMER_BITMODE_BITMODE_08Bit,
.irqn = TIMER1_IRQn
},
}

Definition at line 66 of file periph_conf.h.

◆ uart_config

const uart_conf_t uart_config[]
static
Initial value:
= {
{
.dev = NRF_UARTE0_S,
.rx_pin = GPIO_PIN(0, 28),
.tx_pin = GPIO_PIN(0, 29),
.irqn = UARTE0_SPIM0_SPIS0_TWIM0_TWIS0_IRQn,
},
{
.dev = NRF_UARTE1_S,
.rx_pin = GPIO_PIN(0, 0),
.tx_pin = GPIO_PIN(0, 1),
.irqn = UARTE1_SPIM1_SPIS1_TWIM1_TWIS1_IRQn,
},
}

Definition at line 91 of file periph_conf.h.