Loading...
Searching...
No Matches
TI CC2650 LaunchPad XL

Texas Instruments SimpleLink(TM) CC2650 Wireless MCU LaunchPad(TM) Kit. More...

Detailed Description

Texas Instruments SimpleLink(TM) CC2650 Wireless MCU LaunchPad(TM) Kit.

Overview

The LAUNCHXL-CC2650 is a Texas Instrument's development kit for the CC2650 SoC MCU which combines a Cortex-M3 microcontroller alonside a dedicated Cortex-M0 to control the radio.

Hardware

LAUNCHXL-CC2650

MCU CC2650
Family ARM Cortex-M3
Vendor Texas Instruments
RAM 20KiB
Flash 128KiB
Frequency 48MHz
FPU no
Timers 4
ADCs 1x 12-bit (channels)
UARTs 1
SPIs 2
I2Cs 1
Vcc 1.8V - 3.8V
Datasheet Datasheet
Reference Manual Reference Manual

Board pinout

The CC2650 Quick Start Guide provides the default pinout for the board.

Flashing the Device

Flashing RIOT is quite straight forward. The board comes with an XDS110 on-board debug probe that provides programming, flashing and debugging capabilities through the USB Micro-USB connector. Once either TI Uniflash or OpenOCD are installed just connect the board using the Micro-USB port to your computer and type:

make flash BOARD=cc2650-launchpad

To use OpenOCD instead of uniflash we need to set the PROGRAMMER environment variable, this is to enable OpenOCD instead of Uniflash.

export PROGRAMMER=openocd

Now we can just do make flash and make debug, this all using OpenOCD.

For detailed information about CC2650 MCUs as well as configuring, compiling RIOT and installation of flashing tools for CC2650 boards, see RIOT-OS on CC26xx/CC13xx boards.

Files

file  board.h
 Board specific definitions for TI CC2650 LaunchPad.
 
file  gpio_params.h
 Board specific configuration of direct mapped GPIOs.
 
file  periph_conf.h
 Peripheral MCU configuration for TI CC2650 LaunchPad.