Peripheral configurations for ESP32-S3 WT32-SC01 Plus boards. More...

Detailed Description

Peripheral configurations for ESP32-S3 WT32-SC01 Plus boards.

The peripheral configurations in this file are for the ESP32-S3 WT32-SC01 Plus.

Any modifications required for specific applications can be overridden by application-specific board configuration.

For detailed information about the peripheral configuration for ESP32-S3 boards, see section Common Peripherals.

Note: Most definitions can be overridden by an application-specific board configuration if necessary.

Author: Gunar Schorcht gunar.nosp@m.@sch.nosp@m.orcht.nosp@m..net

Definition in file periph_conf.h.

#include <stdint.h>
#include "periph_conf_common.h"

Include dependency graph for periph_conf.h:

Go to the source code of this file.

I2C configuration
I2C_DEV(0) is used for the FT6336 touch panel. Note The GPIOs listed in the configuration are only initialized as I2C signals when module `periph_i2c` is used. Otherwise they are not allocated and can be used for other purposes.
#define	I2C0_SPEED I2C_SPEED_FAST
	I2C bus speed of I2C_DEV(0)

#define	I2C0_SCL GPIO5
	SCL signal of I2C_DEV(0)

#define	I2C0_SDA GPIO6
	SDA signal of I2C_DEV(0)

SPI configuration
SPI_DEV(0) is used for the SPI SD Card. Note The GPIOs listed in the configuration are first initialized as SPI signals when the corresponding SPI interface is used for the first time by either calling the `spi_init_cs` function or the `spi_acquire` function. Otherwise they are not allocated as SPI signals before and can be used for other purposes as long as the SPI interface is not used.
#define	SPI0_CTRL SPI2_HOST
	FSPI is used as SPI_DEV(0)

#define	SPI0_SCK GPIO39
	FSPI SCK (pin FSPICLK)

#define	SPI0_MISO GPIO38
	FSPI MISO (pin FSPIQ)

#define	SPI0_MOSI GPIO40
	FSPI MOSI (pin FSPID)

#define	SPI0_CS0 GPIO41
	FSPI CS0 (pin FSPICS0)

UART configuration
UART_DEV(0) is available at the PMOD2 connector.
#define	UART0_TXD GPIO43
	direct I/O pin for UART_DEV(0) TxD, can't be changed

#define	UART0_RXD GPIO44
	direct I/O pin for UART_DEV(0) RxD, can't be changed

Macro Definition Documentation

◆ I2C0_SCL

#define I2C0_SCL GPIO5

SCL signal of I2C_DEV(0)

Definition at line 56 of file periph_conf.h.

◆ I2C0_SDA

#define I2C0_SDA GPIO6

SDA signal of I2C_DEV(0)

Definition at line 59 of file periph_conf.h.

◆ I2C0_SPEED

#define I2C0_SPEED I2C_SPEED_FAST

I2C bus speed of I2C_DEV(0)

Definition at line 53 of file periph_conf.h.

◆ SPI0_CS0

#define SPI0_CS0 GPIO41

FSPI CS0 (pin FSPICS0)

Definition at line 89 of file periph_conf.h.

◆ SPI0_CTRL

#define SPI0_CTRL SPI2_HOST

FSPI is used as SPI_DEV(0)

Definition at line 77 of file periph_conf.h.

◆ SPI0_MISO

#define SPI0_MISO GPIO38

FSPI MISO (pin FSPIQ)

Definition at line 83 of file periph_conf.h.

◆ SPI0_MOSI

#define SPI0_MOSI GPIO40

FSPI MOSI (pin FSPID)

Definition at line 86 of file periph_conf.h.

◆ SPI0_SCK

#define SPI0_SCK GPIO39

FSPI SCK (pin FSPICLK)

Definition at line 80 of file periph_conf.h.

◆ UART0_RXD

#define UART0_RXD GPIO44

direct I/O pin for UART_DEV(0) RxD, can't be changed

Definition at line 101 of file periph_conf.h.

◆ UART0_TXD

#define UART0_TXD GPIO43

direct I/O pin for UART_DEV(0) TxD, can't be changed

Definition at line 100 of file periph_conf.h.