nRF52 common

Common files and configuration for nRF52 boards. More...

Detailed Description

Common files and configuration for nRF52 boards.

Flashing nrf52 boards

By default, nrf52 boards are flashed using Jlink. nRF52840-MDK uses PyOCD by default.

To flash the board, use BOARD=<nrf52 board> with the make command.
Example with hello-world application:

make BOARD=<nrf52 board> -C examples/hello-world flash

OpenOCD can also be used to flash nrf52 boards (except thingy52 and ruuvitag because they are hardly coupled with JLink segger_rtt stdio). For the moment, the latest stable version of OpenOCD (0.10) doesn't contain any support for nrf52 but versions built against the current development version can be used.

To flash the board with OpenOCD, use the PROGRAMMER variable:

PROGRAMMER=openocd make BOARD=<nrf52 board> -C examples/hello-world flash

It is also possible to use the SWD interface of a ST-LINK/V2 in-circuit debugger/programmer with OpenOCD to flash a nrf52 board:

PROGRAMMER=openocd OPENOCD_DEBUG_ADAPTER=stlink make BOARD=<nrf52 board> -C examples/hello-world flash

Modules
	NRF52 DK common

Files
file	board_common.h
	Shared files and configuration for all nRF52 boards.
file	cfg_clock_32_0.h
	Common clock configuration for the nRF52 based boards.
file	cfg_clock_32_1.h
	Common clock configuration for the nRF52 based boards.
file	cfg_i2c_default.h
	Default I2C config for nRF52 based boards.
file	cfg_rtt_default.h
	Default RTT configuration for nRF52 based boards.
file	cfg_spi_default.h
	Default SPI config for nRF52 based boards.
file	cfg_timer_default.h
	Default timer configuration for nRF52 based boards.